We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Evaluation of potentially toxic elements and microplastics in the water treatment facility
Summary
Researchers examined a water treatment plant in Poland and found microplastics present throughout the facility, with an average concentration of about 109 particles per liter and sizes up to 4 millimeters. While the toxic metals detected posed low health risk on their own, the presence of microplastics in treated water highlights gaps in current water purification processes that could affect the safety of drinking water.
The potentially harmful effects of consuming potentially toxic elements (PTEs) and microplastics (MPs) regularly via drinking water are a significant cause for worry. This study investigated PTEs (Cd, Cu, Cr, Ni, Pd, Zn, Co), MPs, turbidity, pH, conductivity, and health risk assessment in the water treatment plant in Kielce, Poland. Zn had the highest concentrations throughout the water treatment facility, whereas Cd, Pb, and Co had lower concentrations (< 0.1 µg/L). The order of the concentrations among the specified PTEs was like Zn˃Cu˃Ni˃Cr˃Cd˃Pb and Co. The minimum turbidity was 0.34, and the maximum was 1.9 NTU. The range of pH in water samples was 6.51-7.47. The conductivity was 1,203-1,445 ms in water samples. These identified MPs were categorized into fiber and fragments. The color of these identified MPs was blue, red, black, green, and transparent. The minimum and maximum size of the MPs was 196 and 4,018 µm, while the average size was 2,751 ± 1,905 µm. The average concentration of MPs per liter of the water treatment plant was 108.88 ± 55.61. The elements listed are C, O, Na, Mg, Al, Si, K, Ca, and Ti. Fe and Zn were the predominant elements seen using EDX. HQ values of the PTEs were less than one for adults and children. The human health risk associated with all detected PTEs revealed that the HQ values exhibit a satisfactory degree of non-carcinogenic adverse health risk. HI values for adults and children age groups were less than one. In most water treatment samples, the carcinogenic value exceeds the threshold value of 10-6. The PTEs and MP concentrations in drinking water should be periodically monitored to minimize consumers' environmental pollution and health risks.
Sign in to start a discussion.
More Papers Like This
Evaluation of Potentially Toxic Elements and Microplastics in the Water Treatment Facility
Researchers evaluated potentially toxic elements and microplastics throughout a water treatment facility, finding both contaminant classes present at various treatment stages and raising concerns about the adequacy of current drinking water purification.
Occurrence of microplastics in raw and treated drinking water
Researchers analyzed raw and treated water from three water treatment plants and found microplastics in all samples, though treatment reduced particle counts by roughly 70 to 80 percent. The vast majority of detected particles were smaller than 10 micrometers, a size range often missed by other studies. The findings highlight that while water treatment removes most microplastics, very small particles can still pass through conventional filtration systems.
Presence, identification and characterization of microplastics in a water treatment plant in a municipality in northern Paraná
Researchers investigated the presence, identification, and characterization of microplastics in a water treatment plant in northern Paraná, Brazil, examining whether the treatment process removes MPs from source water before distribution. Microplastics were detected, raising concerns about whether the plant provides adequate protection against this emerging contaminant in drinking water.
Evaluation of the Presence of Microplastics in Wastewater Treatment Plants: Development and Verification of Strategies for Their Quantification and Removal in Aqueous Streams
Researchers evaluated microplastic presence in wastewater treatment plants and developed a pilot capture system capable of detecting, quantifying, and removing microplastic particles from water. The study found that conventional treatment processes are insufficient for complete microplastic removal, highlighting the need for dedicated technologies to address this gap in water treatment infrastructure.
Investigating microplastics at two drinking water treatment plants within a river catchment
Researchers tracked microplastics through each treatment stage at two Czech drinking water treatment plants on the same river, finding that the downstream plant received far higher raw water concentrations (1,296 vs. 23 particles/L) and that current treatment reduced but did not eliminate microplastics from finished drinking water.