We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Investigating microplastics at two drinking water treatment plants within a river catchment
Summary
Researchers tracked microplastics through each treatment stage at two Czech drinking water treatment plants on the same river, finding that the downstream plant received far higher raw water concentrations (1,296 vs. 23 particles/L) and that current treatment reduced but did not eliminate microplastics from finished drinking water.
Microplastics (MPs) are emerging globally distributed pollutants of aquatic environments. Nowadays, MPs are being detected in seas, oceans and freshwater bodies worldwide, even in very remote areas. Studies have reported also the occurrence of MPs in potable water. Despite the potential adverse effects on human health are still largely unknown, the presence of MPs in drinking water deserves more attention. Besides the need for elimination of MPs in natural environments, it is necessary to focus also on their fate and removability at drinking water treatment plants (DWTPs) that pose a barrier for MPs to enter water for human consumption. In our study, we decided to provide unique insight into the occurrence of MPs at two different DWTPs situated on the same river but differing in treatment technology. Quantification and characterization of MPs ≥ 1 μm was conducted not only in raw and treated water but also after each technological treatment step. The results showed that the content of MPs varied greatly between the DWTPs. There were 23 ± 2 and 14 ± 1 MPs L−1 in raw and treated water, respectively, at the upstream DWTP. By contrast, 1296 ± 35 and 151 ± 4 MPs L−1 were found in raw and treated water, respectively, at the downstream DWTP. The majority (>70%) of MPs were smaller than 10 μm, and irregular fragment shape prevailed over fibres. Cellulose acetate, polyethylene terephthalate, polyvinyl chloride, polyethylene, and polypropylene were the most frequently occurring materials. Total removal of MPs of 88% was achieved at the DWTP with a higher initial MP number and more complicated treatment technology consisting of coagulation-flocculation-sedimentation, deep-bed filtration through clay-based material, and granular activated carbon adsorption. These steps contributed to MP elimination by 62%, 20%, and 6%, respectively. These results contribute to filling the knowledge gap regarding the removability of different types of MPs by distinct drinking water treatment technologies operating under ordinary conditions.
Sign in to start a discussion.
More Papers Like This
Occurrence and fate of microplastics at two different drinking water treatment plants within a river catchment
Researchers investigated the occurrence and removal of microplastics at two drinking water treatment plants located on the same river in the Czech Republic. The study found that microplastics were present in raw water at both facilities and that treatment processes reduced but did not fully eliminate microplastic contamination, with removal efficiency varying by treatment technology.
Fate of microplastics in the drinking water production
Researchers tracked the fate of microplastics through drinking water treatment processes, finding that conventional treatment steps like coagulation, sedimentation, and filtration removed the majority of microplastics but did not eliminate them entirely.
Differences in the occurrence of microplastic at two technically diverse drinking water treatment plants within the same river catchment
Researchers compared microplastic occurrence in drinking water produced by two treatment plants using different technologies, finding that treatment design significantly affected which and how many microplastics remained in finished water. The results highlight the importance of treatment technology in determining consumer exposure to microplastics in tap water.
Differences in the occurrence of microplastic at two technically diverse drinking water treatment plants within the same river catchment
Researchers compared microplastic occurrence in drinking water from two technically different treatment facilities, examining how treatment technology influences the presence and type of microplastics in finished drinking water. The two plants produced water with significantly different microplastic profiles, indicating that treatment technology is a key determinant of microplastic concentrations reaching consumers.
Occurrence of microplastics in raw and treated drinking water
Researchers analyzed raw and treated water from three water treatment plants and found microplastics in all samples, though treatment reduced particle counts by roughly 70 to 80 percent. The vast majority of detected particles were smaller than 10 micrometers, a size range often missed by other studies. The findings highlight that while water treatment removes most microplastics, very small particles can still pass through conventional filtration systems.