We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Insight into the effect of UVC-based advanced oxidation processes on the interaction of typical microplastics and their derived disinfection byproducts during disinfection
AI summary Read the abstract
Scientists found that UV-based water treatment processes, while intended to clean drinking water, caused microplastics to release more organic matter and form more disinfection byproducts during chlorination. Up to 42% of the toxic byproducts formed were absorbed back onto the microplastic surfaces, creating contaminated particles. This concerning finding suggests that some common water treatment methods could unintentionally make microplastic contamination in drinking water more hazardous.
The 10 µm polystyrene and polyethylene-terephthalate microplastics (MPs), prevalent in finished drink water, were employed to investigate the effect of normal dosage UVC-based advanced-oxidation-processes (UVC-AOPs) on the interaction between MPs and their derived disinfection-byproducts (DBPs) during subsequent chlorination-disinfection, in the presence of Br, for the first time. The results indicated that UVC/HO caused higher leaching of microplastic-derived dissolved-organic-matter (MP-DOM), with smaller and narrower molecular-weight-distribution than UVC and UVC/peroxymonosulfate (UVC/PMS). The trihalomethanes (as dominant DBPs) molar-formation-potentials (THMs-MFPs) for MP-DOM leached in different UVC-AOPs followed the order of UVC/HO>UVC/PMS>UVC. The adsorption of formed THMs, especially Br-THMs, back on MPs was observed in all MPs suspensions with or without UVC-AOPs pre-treatment. The Cl-THMs adsorption by MPs is more sensitive to UVC-AOPs than Br-THMs. The adsorption experiments showed that UVC-AOPs reduce the capacity but increase the rate of THMs adsorption by MPs, suggesting the halogen and hydrogen bonding forces governed the THMs adsorption rate while hydrophobic interaction determines their adsorption capacity. The UVC-AOPs pre-treatment sharply increased the total yield of THMs via both indirectly inducing MP-DOM leaching and directly increasing the THMs-MFPs of MPs by oxidation. 21.36-41.96% of formed THMs adsorbed back on the UVC-AOPs-pretreated MPs, which might increase the toxicity of MPs.
More Papers Like This
Effects of UV-based oxidation processes on the degradation of microplastic: Fragmentation, organic matter release, toxicity and disinfection byproduct formation
AI summary Read the abstract
This study examined how UV-based water treatment processes break down microplastics, finding that while the treatments fragment the plastics into smaller pieces, they also release potentially toxic organic compounds. The smaller fragments and released chemicals may actually pose greater risks than the original microplastics. This is an important finding because it suggests that some water purification methods could unintentionally make microplastic pollution more hazardous to human health.
Insight into the dynamic transformation properties of microplastic-derived dissolved organic matter and its contribution to the formation of chlorination disinfection by-products
AI summary Read the abstract
Researchers studied how dissolved organic matter released from microplastics transforms under UV light and how it contributes to the formation of harmful disinfection byproducts during water chlorination. They found that UV exposure changed the chemical composition of the microplastic-derived organic matter, affecting its reactivity during disinfection. The findings suggest that microplastics in water sources may indirectly increase the formation of potentially harmful chemicals during standard water treatment.
Unveiling the optical and molecular characteristics of aging microplastics derived dissolved organic matter transformed by UV/chlor(am)ine oxidation and its potential for disinfection byproducts formation
AI summary Read the abstract
Researchers studied how UV light and common water disinfection chemicals break down microplastics in water and found that different treatment methods produce different types of dissolved organic matter from the plastic. Some treatment combinations, particularly UV with chlorine, created byproducts that could form harmful disinfection byproducts when water is later chlorinated. This is important because it means water treatment processes might unintentionally create new toxic compounds from the microplastics already present in water.
The potential risks posed by micro-nanoplastics to the safety of disinfected drinking water
AI summary Read the abstract
This review examines the risks that micro- and nanoplastics pose to the safety of disinfected drinking water. Researchers found that common disinfection processes like ozone, chlorine, and UV treatment can actually make plastics more harmful by promoting leaching of organic compounds and generating disinfection byproducts. The study suggests that enhanced treatment technologies such as advanced coagulation, membrane filtration, and improved detection methods are needed to effectively remove these contaminants and prevent secondary hazards.
UV aging of microplastic polymers promotes their chemical transformation and byproduct formation upon chlorination
AI summary Read the abstract
Researchers studied how UV aging of different microplastic polymers affects their behavior during water chlorination treatment. They found that UV aging significantly increased the reactivity of polyamide and polyester microplastics, promoting the release of harmful organic compounds and the formation of disinfection byproducts by more than 10-fold. The study reveals that weathered microplastics in drinking water systems may generate more toxic byproducts during standard chlorination than their pristine counterparts.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.