We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Biodegradable taro stem cellulose aerogel: A simple approach for adsorbing microplastics and dyestuffs contaminants
AI summary Read the abstract
Scientists created a biodegradable aerogel from waste taro stems that can effectively absorb both microplastics and dye pollutants from water. The material maintained strong performance across different water conditions and could be reused for at least five cycles, offering a green solution for removing multiple contaminants from water simultaneously.
Water pollution and agricultural waste are pressing global issues. Herein, a biomass aerogel derived from waste taro stem microcrystalline cellulose (TS-MCC) was fabricated, in which, the effects of cellulose amount, cross-linker content, pre-freezing protocols on the aerogel's property were studied. The optimized TS-MCC aerogel exhibited a hierarchical porous structure with good mechanical property (65.04 kPa) and adsorption capacities, with the q towards microplastics (Polystyrene, PS) and dye (Congo red, CR) being 418.6 mg/g and 951.51 mg/g at 298 K, respectively. Meanwhile, it exhibited good applicability under different pH (3-11) and ionic strength environments, as well as the retained notably simultaneous adsorption ability even under mixed contaminant systems. The mathematical models suggested that the adsorption of PS and CR both fitted pseudo-second-order kinetics, and the adsorption isotherms could be described by the Langmuir and Freundlich models, respectively. Hydrogen bonding, electrostatic attraction, and π-π interactions were inferred as the main adsorption mechanisms towards PS and CR according to Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy analysis. Moreover, the adsorption efficiencies were 92.37 % for PS and 88.34 % for CR after 5 reuse cycles. Therefore, this study provides a green aerogel sorbent for adsorbing microplastics and dyes contaminants.
More Papers Like This
Dialdehyde modified and cationic aerogel for efficient microplastics adsorption from environmental waters
AI summary Read the abstract
Scientists developed a plant-based aerogel material that can efficiently absorb microplastics from water, achieving removal rates above 90% across a wide range of water conditions. The material maintained its effectiveness after eight reuse cycles, making it a practical and eco-friendly solution. This type of technology could help reduce microplastic levels in rivers, lakes, and reservoirs that supply drinking water.
Degradable quaternary ammonium salt-modified rice straw cellulose/chitosan composite aerogel for high-efficiency microplastic adsorption
AI summary Read the abstract
Researchers created a quaternary ammonium salt-modified cellulose/chitosan composite aerogel from discarded rice straw and tested it for microplastic adsorption, achieving high removal efficiency and capacity while using a waste-based feedstock to address an emerging pollution problem.
Efficient microplastics adsorption in aqueous environments via bidirectional ordered graphene oxide/nanocellulose aerogels
AI summary Read the abstract
Researchers developed a new material made from graphene oxide and nanocellulose that can effectively remove microplastics from water. The aerogel absorbed up to 241 milligrams of microplastics per gram of material and maintained over 80% efficiency after 20 reuse cycles. This kind of reusable filter technology could help reduce the amount of microplastics reaching drinking water sources and the food chain.
Dynamic adsorption behavior of bio-based adsorbent for multicomponent wastewater
AI summary Read the abstract
Scientists created a plant-based water filter—made from a fluffy natural fiber called kapok, coated with special binding materials—that can pull multiple types of pollutants out of water at once, including dyes, solvents, and tiny plastic particles (nanoplastics). This matters because real-world contaminated water rarely has just one pollutant, and this affordable, biodegradable filter tackled several contaminants simultaneously in continuous-flow tests, suggesting it could offer a practical tool for cleaning up drinking water sources and reducing human exposure to mixed pollutants, including microplastics.
A Monolithic Carbon Nanotube-Reinforced Cellulose Benzoate Hydrogel for Simultaneous Removal of Microplastics and Per- and Polyfluoroalkyl Substances from Water
AI summary Read the abstract
Researchers created a sponge-like gel made from treated cellulose and carbon nanotubes to pull both plastic particles and PFAS chemicals out of water. In lab tests, including river water samples, the material removed over 97% of both contaminants and kept working after five reuse cycles.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.