We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
The emission and physicochemical properties of airborne microplastics and nanoplastics generated during the mechanical recycling of plastic via shredding
AI summary Read the abstract
Researchers measured airborne microplastics and nanoplastics generated during the shredding step of mechanical plastic recycling. They found that particle concentrations during shredding were 3 to nearly 3,000 times higher than background levels, with waste plastics producing more emissions than new plastics due to labels, adhesives, and additives. The findings highlight shredding as a significant source of respirable plastic particles for recycling facility workers.
This study examined the emission and physicochemical properties of microplastics and nanoplastics (MPs/NPs) generated during shredding, which is regularly used in mechanical recycling. Waste and new polyethylene terephthalate, polypropylene, and high-density polyethylene were investigated herein for a total of six categories. The concentration and size distribution of particles were measured using two spectrometer instruments, and morphology and elemental composition of emitted particles were analyzed with microscopy and spectroscopy. This study found that number concentrations in both submicron and micron sizes of respirable particles were 3-2910× higher during periods of shredding than pre-shredding background concentrations. Maximum concentrations of particles within 10-420 nm, across all six categories, ranged from 22,000- to 1,300,000-particles/cm during shredding, compared to average background levels of 700 particles/cm. Maximum concentrations of particles within 0.3 to 10 μm, across all six categories, ranged from 24- to 2000-particles/cm during shredding, compared to average background levels of 2 particles/cm. Waste plastics consistently generated higher emissions than their new counterparts, which is attributed to the labels, adhesives, and increased additives incorporated into the waste plastic. Morphology varied drastically between particles and an elemental composition analysis found that the samples consisted primarily of C and O, representing the polymer material, as well as Na, Mg, Al, Si, Cu, Cl, K, Ca, Ti, Fe, Rb, and Br representing additives, label, and other contaminates. The shredding of plastic has the potential to expose workers to elevated concentrations of airborne MPs/NPs, especially those between 10 and 100 nm.
More Papers Like This
Plastic breath: Quantification of microplastics and polymer additives in airborne particles
AI summary Read the abstract
Researchers measured microplastics and their chemical additives in airborne dust at an electronics recycling plant, identifying ten different plastic types and eight classes of additives including flame retardants and phthalates. The findings confirm that people can inhale microplastics along with potentially harmful chemicals at work, raising concerns about respiratory and overall health risks from airborne plastic pollution.
Study of airborne microplastics emissions in workplaces
AI summary Read the abstract
Researchers measured airborne microplastic emissions in occupational settings, finding that workplaces can be significant sources of MP exposure through inhalation. The study characterized particle size, composition, and concentration of MPs in workplace air across different industrial environments.
Airborne Microplastics in Workplaces: Preliminary Findings from a Multi-site Investigation of Plastic Handling and Processing Facilities
AI summary Read the abstract
A multi-site investigation of airborne microplastics in plastic handling and processing workplaces found elevated concentrations compared to outdoor air, with particle morphology and polymer types reflecting the specific plastics handled at each facility, identifying occupational inhalation as a significant exposure pathway.
Evaluating the generation of microplastics from an unlikely source: The unintentional consequence of the current plastic recycling process
AI summary Read the abstract
This study revealed that the plastic recycling process itself generates large quantities of microplastics, particularly during the mechanical shredding step. Depending on the plastic type, shredding produced between 7,000 and 29,000 microplastic particles per kilogram of material processed, and weathered plastics generated even more. This is an important finding because it means recycling, which is intended to reduce plastic pollution, may actually be creating a significant new source of microplastic contamination.
Comparision of air sampling techniques to analyse microplastics during plastic recycling
AI summary Read the abstract
Researchers compared air sampling methods for measuring microplastics released during plastic recycling operations, evaluating capture efficiency and particle size coverage. The study identified which sampling approaches are most suitable for characterizing worker inhalation exposure in recycling facilities.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.