We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Simultaneous removal of Microcystis aeruginosa and microplastics by oxidation enhanced coagulation
Summary
A water treatment study found that combining hydrogen peroxide-enhanced iron coagulation simultaneously removed over 90% of both the harmful cyanobacterium Microcystis aeruginosa and polystyrene microplastics from water, with algae biomass actually improving microplastic removal efficiency. This dual-contaminant treatment approach is promising for drinking water utilities that face both algal blooms and microplastic contamination.
The composite pollution is an increasingly severe challenge in the field of water treatment. Especially, microplastics (MPs) contamination and Microcystis aeruginosa (M. aeruginosa) were verified that they could synergistically pose a serious threat to safety of drinking water. Therefore, developing effective removal technology is an urgent task. In this study, the simultaneous removal of M. aeruginosa and polystyrene (PS, a typical plastic matter) was investigated by HO enhanced Fe(II) coagulation. The results demonstrated that the removal rate of both algae and PS can reach over 90%. It was also demonstrated that the PS removal efficiency increased from 23.3% to 97.3% with the increase of M. aeruginosa biomass from 0 cells/mL to 0.5 × 10 cells/mL. The possible reason might be that the addition of algal cells raises the number of contaminant particles, which greatly increases the floc size during the coagulation process. It makes MPs easier to be trapped by sweep flocculation in this process. Additionally, naturally weathered polystyrene (NWPS) exhibited higher removal rate than virgin PS, due to more original functional groups, larger particle size (d 9.75 μm-11.25 μm), and a lower absolute zeta potential (-34.15 mV to -30.1 mV). Furthermore, low Fe residue level and AOM (algal organic matter) control was simultaneously achieved in this process (TOC <1 mg/L, MCs <1 μg/L). Therefore, this study suggests that the HO-Fe(II) process is an efficient and green technology for the removal of M. aeruginosa and PS composite pollutants without secondary pollution, which is promising technology in drinking water treatment plant.
Sign in to start a discussion.
More Papers Like This
Behaviour of M. aeruginosa–Microplastic composite pollutants in coagulation and sludge storage
Microcystis aeruginosa extracellular polymers promoted adhesion of microplastics to algal flocs during coagulation, improving MP removal efficiency with polyaluminum chloride, while microplastics had opposite effects on algal removal depending on whether inorganic or organic coagulants were used.
Removal of polystyrene and polyethylene microplastics using PAC and FeCl3 coagulation: Performance and mechanism
Researchers studied how two common water treatment coagulants, PAC and iron chloride, remove polystyrene and polyethylene microplastics from water. They found that PAC was more effective than iron chloride, and that alkaline conditions improved removal rates. The study provides practical insights for drinking water treatment plants looking to reduce microplastic contamination in their supply.
Synergistic fouling mitigation of co-contaminants of ultrafine microplastics and organics in seawater pretreatment using ferrous iron/peracetic acid
Researchers developed an advanced coagulation method using ferrous iron and peracetic acid to remove ultrafine microplastics and algal organic matter from seawater during desalination pretreatment. The new system achieved 84% turbidity removal, far surpassing conventional ferrous iron treatment at 19%, by forming larger and denser particle clusters. The study demonstrates that this approach could address the growing challenge of microplastic-organic co-contamination in seawater treatment.
Comprehensive effects of microplastics on algae-laden surface water treatment by coagulation-ultrafiltration combined process: Algae cultivation, coagulation performance and membrane fouling development
Researchers studied how microplastics affect the treatment of algae-contaminated drinking water using a combined filtration process. They found that microplastics initially stimulated algae growth by 58% but then suppressed the algae's release of organic compounds, and the plastics actually helped form larger clumps during water treatment. While microplastics complicated the treatment process in some ways, understanding these interactions is important for ensuring drinking water plants can effectively remove both algae and microplastics.
Investigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.