We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Synergistic fouling mitigation of co-contaminants of ultrafine microplastics and organics in seawater pretreatment using ferrous iron/peracetic acid
AI summary Read the abstract
Researchers developed an advanced coagulation method using ferrous iron and peracetic acid to remove ultrafine microplastics and algal organic matter from seawater during desalination pretreatment. The new system achieved 84% turbidity removal, far surpassing conventional ferrous iron treatment at 19%, by forming larger and denser particle clusters. The study demonstrates that this approach could address the growing challenge of microplastic-organic co-contamination in seawater treatment.
The increasing occurrence of ultrafine microplastics (MPs, 3 μm) and algal organic matter (AOM), such as humic acid (HA), in seawater poses a growing challenge to conventional desalination pretreatment, as their interactions can lead to MP-HA co-contaminants that significantly reduce the effectiveness of traditional coagulants (e.g., FeCl). Furthermore, ultrafiltration (UF) of MP-HA co-contaminants showed a synergistic increase in the modified fouling index (MFI), exceeding the sum of individual effects. This intensified fouling was due to MPs serving as scaffolds for HA, which was immobilized through non-covalent interactions such as hydrogen bonding, π-π stacking, and electrostatic attraction, resulting in reduced porosity and a denser cake layer. To address this issue, this study proposed an advanced coagulation using ferrous iron/peracetic acid (Fe/PAA) for the treatment of MP-HA (20 mg/L HA and 10 mg/L MPs) in seawater (both synthetic seawater and real seawater). At an optimal dosage of 0.2 mM Fe/0.1 mM PAA, the Fe/PAA system demonstrated superior coagulation performance compared to 0.2 mM Fe, achieving more effective charge neutralization (Fe: -14.7 mV; Fe/PAA: -5.8 mV) and forming larger, denser flocs (Fe: 74.2 μm; Fe/PAA: 104 μm), resulting in significantly improved coagulation performance (e.g., turbidity removal of 83.9 %; 19.0 % for Fe). Regarding the unique mechanisms of Fe/PAA in seawater, we found that a high Cl concentration of 25 g/L (428 mM) markedly influenced the dominant reactive species by scavenging •OH radicals, thereby increasing the proportion of FeO from 13.7 % to 40.3 %, highlighting the critical role of FeO in enhancing coagulation performance. Furthermore, compared to Fe, Fe/PAA primarily mitigated membrane fouling caused by cake layer formed by MP-HA, resulting in a 1.8-fold improvement in membrane flux by the end of filtration. Crucially, trials in real natural seawater demonstrated that Fe/PAA preserved its enhanced coagulation and fouling-control effectiveness under authentic marine conditions. Collectively, this study reveals the synergistic fouling effects of MP-HA in seawater desalination and offers theoretical and technical guidance for applying Fe/PAA to address this emerging challenge.
More Papers Like This
Enhanced removal of polyethylene microplastics from water through polymeric ferric sulfate with laminarin
AI summary Read the abstract
Researchers developed an enhanced coagulation technique using polymeric ferric sulfate combined with laminarin, a seaweed-derived compound, to remove polyethylene microplastics from water. The combined approach achieved a 93.8% removal rate compared to only 48.5% with the coagulant alone, by significantly boosting charge neutralization and adsorption bridging mechanisms. The study demonstrates that natural coagulant aids can substantially improve the effectiveness of microplastic removal during water treatment.
Investigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
AI summary Read the abstract
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.
Microplastic removal under different salinity levels using kaolin-assisted coagulation with modified Caryocar brasiliense coagulants
AI summary Read the abstract
Researchers tested two plant-based, mineral-assisted treatments to remove tiny polyethylene plastic particles from salty water samples in lab experiments. One treatment, using iron particles, removed about 80% of microplastics and worked well even in real coastal water, while the other removed about 72% but was affected by water acidity and organic matter.
The influence of coagulation process conditions on theefficiency of microplastic removal in water treatment
AI summary Read the abstract
Researchers investigated how coagulation process conditions — including coagulant type, pH, and microsand addition — affect the removal of polyethylene, PVC, and textile microfibers from river water, municipal wastewater, laundry effluent, and synthetic matrices. Ferric chloride and polyaluminum chloride both achieved substantial removal, with performance varying significantly by water matrix and microplastic type.
Removal of polystyrene and polyethylene microplastics using PAC and FeCl3 coagulation: Performance and mechanism
AI summary Read the abstract
Researchers studied how two common water treatment coagulants, PAC and iron chloride, remove polystyrene and polyethylene microplastics from water. They found that PAC was more effective than iron chloride, and that alkaline conditions improved removal rates. The study provides practical insights for drinking water treatment plants looking to reduce microplastic contamination in their supply.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.