0
Article Tier 2 Environmental Sources Human Health Effects Marine & Wildlife Remediation Sign in to save

Dynamic extraction of microplastics from simulated and natural freshwaters using a rotating coiled column

Analytical Methods 2025 1 citation

AI summary Read the abstract

Researchers developed a dynamic extraction method using a rotating coiled column to remove microplastics from freshwater samples. The liquid-liquid extraction technique successfully captured microplastic particles from both simulated and natural water sources. The study presents a novel approach to water treatment that could complement existing technologies for reducing microplastic contamination in drinking water.

Study Type Environmental

At present, microplastic pollution in aquatic environments is raising increasing concerns on its risks for the human health. The efficiency of existing water treatment technologies, which are based on different physical principles, is still insufficient for the removal of microplastics from aqueous media, and hence, novel methods are needed. Thus far, liquid-liquid extraction has not been used in water treatment processes; however, it has great potential for removing microplastics from water. This study was aimed at the development of a novel method based on dynamic liquid-liquid extraction in a rotating coiled column for the removal of microplastics from aqueous samples. It was demonstrated that liquid-liquid extraction in a rotating coiled column (inner capacity 25 of mL) using castor oil as the stationary phase offered more than 96% recovery rate of the five most abundant microplastics (μPE, μPP, μPS, μPVC, and μPET) of different sizes (<63, 63-100, and 100-250 μm) from simulated freshwater (sample volume of 20 mL). An average recovery rate of 100% was observed for the mixture of these five microplastics from a spiked natural river water sample. Notably, the recovery rate was not dependent on the size and type of microplastics under study. It was also found that in a column with a tubing bore of 1.6 mm, the flow rate of the aqueous suspension of microplastics (mobile phase) could be increased up to 5 mL min-1 without decreasing the extraction efficiency. The scale-up of the extraction process was also possible.

More Papers Like This

Article Tier 2

Separation of microplastics from river water in a rotating spiral column using a water-oil system

AI summary Read the abstract

Researchers demonstrated for the first time the use of a rotating spiral column with a water-oil system to separate and quantify microplastics from river water samples, presenting this flowing separation method as a new analytical chemistry approach for assessing microplastic pollution in natural water bodies.

Article Tier 2

Extraction of Microplastics from River Water in a Rotating Coiled Column Using a Water–Oil System

AI summary Read the abstract

Researchers demonstrated for the first time the use of a rotating coiled column with a water-oil system to continuously separate microplastics from river water samples. After separation, pyrolysis GC-MS was used to confirm polymer identity in extracted particles from Moscow River water, establishing proof of concept for this novel analytical approach.

Article Tier 2

A straightforward method for microplastic extraction from organic-rich freshwater samples

AI summary Read the abstract

Researchers developed a streamlined method for extracting microplastics from organic-rich freshwater samples using centrifugation and enzymatic digestion. They found that the approach effectively concentrated microplastics while preserving their integrity and minimizing contamination, at lower cost than existing methods. The study offers a practical and accessible protocol for laboratories studying microplastic pollution in freshwater environments.

Article Tier 2

Continuous-Flow Extraction of Microplastics in a Centrifugal Extractor Using a Water–Oil System

AI summary Read the abstract

Scientists have developed a fast, efficient method to pull microplastic particles out of water by spinning it together with oil in a specialized device—similar to how oil and water separate, but sped up and controlled. The technique captured 98% of microplastic particles, which is promising news for improving how we detect and remove these tiny pollutants from our water supply before they end up in what we drink. While this study focused on the extraction technology itself rather than health effects, better detection tools are a key step toward understanding and reducing our exposure to microplastics.

Article Tier 2

Development and evaluation of a water treatment system for the removal of microplastics in an aqueous medium.

AI summary Read the abstract

Researchers developed and evaluated a water treatment system for removing microplastics from aqueous media, addressing the urgent environmental concern of microplastic contamination in rivers, seas, and oceans and assessing the system's effectiveness as a promising water purification technology.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper