We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhanced retention of small-sized microplastics by iron-containing sand filtration system: Effectiveness and mechanisms
Summary
Researchers tested iron-loaded sand (IS) as an enhanced filtration medium for removing small microplastics from drinking water by exploiting electrostatic attraction between iron oxide coatings and negatively charged MPs. IS dramatically outperformed bare sand, reducing effluent mass percentages from ~53% to 0.79% for 200 nm MPs and from ~39% to 2.81% for 1000 nm MPs, while maintaining performance across extended filtration runs.
This study explores the enhanced retention of small-sized microplastics (MPs) in sand filtration systems using iron-loaded sand (IS). Conventional sand filtration has limited efficiency in removing MPs smaller than the pore size of the filter media, which presents a significant challenge for drinking water treatment plants (DWTPs). To address this issue, quartz sand was modified with iron (hydro)oxide coatings to alter the surface charge, enabling a strong electrostatic attraction with negatively charged MPs. In a 10 mmol/L NaCl solution at a flow rate of 1.5 mL/min, the effluent mass percentages (M) of polystyrene 200 nm MPs (MP200) and 1000 nm MPs (MP1000) decreased from 53.52% and 39.40% in bare sand (BS) to 0.79% and 2.81%, respectively. Additionally, IS maintained complete retention of MPs at various ionic strengths and valences. In binary system, while competitive attachment caused an 8.42% increase in the M of MP1000 in IS, series-connected columns achieved complete retention. Operational stability tests under realistic conditions, such as variable flow rates, 24-hour interruptions, and back-flushing cycles, demonstrated that IS consistently outperformed BS, with minimal MPs release. Moreover, IS achieved near-total MPs removal in the presence of humic acid and natural pond water, emphasizing its durability under complex environmental conditions. By addressing the challenges of limited retention in traditional systems and competitive attachment in mixed MPs systems, this study highlights IS as a scalable and effective solution for mitigating MPs pollution in drinking water. These findings offer crucial insights into enhancing filtration efficiency across a range of environmental and operational scenarios.
Sign in to start a discussion.
More Papers Like This
Application of Iron Oxide-Coated Membranes in Permeable Block Systems for Advanced Removal of Micro- and Nanoplastics
This study evaluated iron oxide-coated membranes integrated into permeable block systems for removing microplastics and nanoplastics from aqueous media. The iron oxide coating enhanced MP capture through electrostatic and magnetic interactions, achieving higher removal efficiencies than uncoated membranes.
Effective removal of Micro- and nanoplastics from water using Iron oxide nanoparticles: Mechanisms and optimization
Researchers developed a magnetic separation method using iron oxide nanoparticles to remove micro- and nanoplastics from water, achieving up to 95% removal efficiency within just 20 minutes. The technique works through hydrophobic interactions between the iron oxide particles and plastic surfaces, and was particularly effective for smaller nanoplastics. The method offers a relatively simple, rapid, and cost-effective approach to filtering plastic particles from contaminated water.
Testing an Iron Oxide Nanoparticle-Based Method for Magnetic Separation of Nanoplastics and Microplastics from Water
Researchers tested iron oxide nanoparticles with hydrophobic coatings as a method for magnetically separating micro- and nanoplastics from water. The approach achieved 100% removal of larger microplastics and nearly 90% removal of nanoplastics using a simple permanent magnet, suggesting a viable method for water purification and environmental monitoring.
Magnetic Removal of Micro‐ and Nanoplastics from Water—from 100 nm to 100 µm Debris Size
Researchers demonstrated a magnetic method for removing micro- and nanoplastics from water using iron oxide nanoparticles that attract oppositely charged plastic particles. The technique was effective across a wide size range, from 100 nanometers to 100 micrometers, and worked with multiple plastic types. The study suggests that magnetic removal could help address the gap in current wastewater treatment, which struggles to capture the smallest plastic particles.
Efficiency and mechanism of micro- and nano-plastic removal with polymeric Al-Fe bimetallic coagulants: Role of Fe addition
Researchers investigated polymeric Al-Fe bimetallic coagulants for removing micro- and nanoplastics from drinking water, finding that iron addition enhanced nanoplastic removal efficiency through improved charge neutralization and floc formation mechanisms.