We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Testing an Iron Oxide Nanoparticle-Based Method for Magnetic Separation of Nanoplastics and Microplastics from Water
Summary
Researchers tested iron oxide nanoparticles with hydrophobic coatings as a method for magnetically separating micro- and nanoplastics from water. The approach achieved 100% removal of larger microplastics and nearly 90% removal of nanoplastics using a simple permanent magnet, suggesting a viable method for water purification and environmental monitoring.
Nanoplastic pollution is increasing worldwide and poses a threat to humans, animals, and ecological systems. High-throughput, reliable methods for the isolation and separation of NMPs from drinking water, wastewater, or environmental bodies of water are of interest. We investigated iron oxide nanoparticles (IONPs) with hydrophobic coatings to magnetize plastic particulate waste for removal. We produced and tested IONPs synthesized using air-free conditions and in atmospheric air, coated with several polydimethylsiloxane (PDMS)-based hydrophobic coatings. Particles were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), superconducting quantum interference device (SQUID) magnetometry, dynamic light scattering (DLS), X-ray diffraction (XRD) and zeta potential. The IONPs synthesized in air contained a higher percentage of the magnetic spinel phase and stronger magnetization. Binding and recovery of NMPs from both salt and freshwater samples was demonstrated. Specifically, we were able to remove 100% of particles in a range of sizes, from 2-5 mm, and nearly 90% of nanoplastic particles with a size range from 100 nm to 1000 nm using a simple 2-inch permanent NdFeB magnet. Magnetization of NMPs using IONPs is a viable method for separation from water samples for quantification, characterization, and purification and remediation of water.
Sign in to start a discussion.
More Papers Like This
Effective removal of Micro- and nanoplastics from water using Iron oxide nanoparticles: Mechanisms and optimization
Researchers developed a magnetic separation method using iron oxide nanoparticles to remove micro- and nanoplastics from water, achieving up to 95% removal efficiency within just 20 minutes. The technique works through hydrophobic interactions between the iron oxide particles and plastic surfaces, and was particularly effective for smaller nanoplastics. The method offers a relatively simple, rapid, and cost-effective approach to filtering plastic particles from contaminated water.
Removal of microplastics from water by magnetic nano-Fe3O4
Researchers developed a method for removing microplastics from water using magnetic iron oxide nanoparticles that attach to plastic surfaces, allowing the particles to be pulled out with a magnet. The technique achieved removal rates above 80% for common microplastic types in environmental water samples including river water, sewage, and seawater, suggesting a practical approach for water treatment.
Magnetic Removal of Micro‐ and Nanoplastics from Water—from 100 nm to 100 µm Debris Size
Researchers demonstrated a magnetic method for removing micro- and nanoplastics from water using iron oxide nanoparticles that attract oppositely charged plastic particles. The technique was effective across a wide size range, from 100 nanometers to 100 micrometers, and worked with multiple plastic types. The study suggests that magnetic removal could help address the gap in current wastewater treatment, which struggles to capture the smallest plastic particles.
Removal of Micro and Nanoplastics from Water Using Magnetic Nanoparticles: A Review
This review evaluates the use of magnetic nanoparticles as a technology for removing micro- and nanoplastics from water. Researchers found that magnetic nanoparticles can effectively capture plastic particles through surface interactions and be easily separated from water using magnets. The study suggests this approach offers a promising and energy-efficient method for cleaning microplastic-contaminated water, though challenges remain in scaling it for real-world applications.
Application of Iron Oxide-Coated Membranes in Permeable Block Systems for Advanced Removal of Micro- and Nanoplastics
This study evaluated iron oxide-coated membranes integrated into permeable block systems for removing microplastics and nanoplastics from aqueous media. The iron oxide coating enhanced MP capture through electrostatic and magnetic interactions, achieving higher removal efficiencies than uncoated membranes.