We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Adsorption behavior of crude oil hydrocarbons on polyethylene microplastics in batch experiments
Summary
Researchers conducted batch experiments to measure how crude oil hydrocarbons adsorb onto polyethylene microplastics of 300-600 µm size under environmentally relevant conditions. Hydrocarbon adsorption followed pseudo-second-order kinetics and was influenced by oil composition, with lighter fractions showing faster initial uptake, suggesting PE microplastics can act as vectors for oil pollution in spill scenarios.
This study examines the impact of microplastics on the fate of spilled crude oil in water. Batch adsorption experiments were conducted using polyethylene microplastics ranging in size between 300 and 600 μm. Environmentally relevant concentrations of crude oil and microplastics were tested. Samples processing involved liquid-liquid extraction (LLE) followed by quantitative analysis using Gas-Chromatography coupled to Mass Spectrometry. Kinetic analyses employed the most commonly used models in microplastic adsorption studies, including the pseudo-first order, pseudo second-order, Elovich, and intra-particle diffusion models. Results mainly conformed to the Elovich model, followed by the pseudo-second order model, suggesting chemisorption. Isotherm evaluations involved the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models, selected for their effectiveness in describing the behavior of microplastics in adsorption studies. These models revealed diverse behaviors: alkanes from nC11-nC21 conformed to the Freundlich isotherm, suggesting multilayer adsorption. While nC10, nC27-nC29, nC33, and nC34 were best described by the Langmuir model, and nC22-nC26 and nC30-nC32 adhered to the Temkin model, both indicative of monolayer adsorption. Notably, nC35 adsorption was best described by the Dubinin-Radushkevich model. The different PAHs exhibited preferences for either the Freundlich or the Langmuir model. The maximum adsorption capacities of the contaminants onto polyethylene were 263.12 and 101.57 mg.g for the targeted alkanes and PAHs, respectively, corresponding to a maximum adsorption of 5.75 mg of targeted hydrocarbons per m of polyethylene. The study highlighted the potential role of microplastics in influencing the environmental fate of selected crude oil hydrocarbons and provided insights into their interaction and partitioning behavior in water.
Sign in to start a discussion.
More Papers Like This
Sorption behaviors of crude oil on polyethylene microplastics in seawater and digestive tract under simulated real-world conditions
Polyethylene microplastics can absorb crude oil from seawater, and once ingested by aquatic organisms, some of that oil can be released in simulated gut conditions. This suggests microplastics could act as vectors that concentrate and deliver toxic hydrocarbons to marine life.
Sorption and desorption of petroleum hydrocarbons on biodegradable and nondegradable microplastics
Researchers compared sorption and desorption of petroleum hydrocarbons on six microplastic types including both biodegradable polylactic acid and five nondegradable polymers, finding that sorption kinetics followed pseudo-second-order models indicating chemical sorption dominance. The study identified intraparticle diffusion and liquid film diffusion as key rate-controlling steps, with differences between biodegradable and nondegradable microplastics in their hydrocarbon-carrying capacity.
Sorption behaviors of petroleum on micro-sized polyethylene aging for different time in seawater
Researchers found that aging of polyethylene microplastics in seawater over 180 days progressively increased petroleum adsorption capacity, with surface oxidation and roughening from weathering creating more binding sites for hydrocarbon contaminants.
Sorption of Total Petroleum Hydrocarbons in Microplastics
Laboratory and field tests of petroleum hydrocarbon sorption onto six types of microplastics found LDPE had the highest fuel oil sorption capacity, with field samples from Gulf of Mexico beaches showing 1660 to 35,258 mg TPH per kg microplastic, suggesting microplastics serve as significant hydrocarbon carriers.
Role of light microplastics in the dispersion process of spilled crude oil in the marine environment
This study examined how the presence of polyethylene and polystyrene microplastics affects the dispersion of crude oil after a spill in simulated ocean conditions, finding that microplastics increased oil dispersion efficiency by altering interfacial properties. The results have implications for oil spill response in microplastic-contaminated marine environments.