We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Picogram-Level Nanoplastic Analysis with Nanoelectromechanical System Fourier Transform Infrared Spectroscopy: NEMS-FTIR
Summary
Researchers developed a NEMS-FTIR approach combining nanoelectromechanical systems with Fourier transform infrared spectroscopy for chemical characterization and quantification of nanoplastics, achieving picogram-level detection limits ranging from 101 to 353 pg for polypropylene, polystyrene, and polyvinyl chloride nanoplastics with diameters from 54 to 262 nm.
We present a photothermal infrared spectroscopy-based approach for the chemical characterization and quantification of nanoplastics. By combining the high sensitivity of nanoelectromechanical systems (NEMS) with the wide spectral range and ubiquity of commercially available Fourier transform infrared (FTIR) spectrometers, NEMS-FTIR offers a time-efficient and cryogen-free option for the rapid, routine analysis of nanoplastics in aqueous samples. Polypropylene, polystyrene, and polyvinyl chloride nanoplastics with nominal diameters ranging from 54 to 262 nm were analyzed by NEMS-FTIR with limits of detection ranging from 101 pg to 353 pg, one order of magnitude lower than values reported for pyrolysis-gas chromatography-mass spectrometry of nanoplastics. The absorptance measured by NEMS-FTIR could be further converted to absolute sample mass using the attenuation coefficient, as demonstrated for polystyrene. Thanks to the wide spectral range of NEMS-FTIR, nanoplastic particles from different polymers could be readily identified, even when present in a mixture. The potential of NEMS-FTIR for the analysis of real samples was demonstrated by identifying the presence of nanoplastics released in water during tea brewing. Polyamide leachates in the form of fragments and smaller oligomers could be identified in the brewing water without sample pre-concentration, even in the presence of an organic matrix. Accelerated aging of the nylon teabags under elevated temperature and UV radiation showed further release of polyamide over time.
Sign in to start a discussion.
More Papers Like This
B2.4 - Nanoelectromechanical System Fourier Transform Infrared Spectroscopy (NEMS-FTIR) for Nanoplastic and Polymer Degradation Analysis
Researchers developed a highly sensitive technique combining nanoelectromechanical systems with infrared spectroscopy (NEMS-FTIR) that can detect as little as 1 nanogram of polystyrene or polypropylene nanoplastic particles as small as 54 nm in diameter. This breakthrough in detection sensitivity could greatly improve researchers' ability to identify and characterize nanoplastics — the tiniest and hardest-to-detect form of plastic pollution — in environmental and biological samples.
Photoinduced Force Microscopy as an Efficient Method Towards the Detection of Nanoplastics
Researchers demonstrated photoinduced force microscopy as an effective method for detecting and chemically characterizing individual nanoplastic particles, overcoming limitations of conventional techniques that lack either sufficient spatial resolution or spectroscopic capability at the nanoscale.
Analysing micro- and nanoplastics with cutting-edge infrared spectroscopy techniques: a critical review
This review evaluates cutting-edge infrared spectroscopy techniques for detecting and analyzing micro- and nanoplastics in environmental and food samples. Better detection methods are crucial for understanding human exposure because they allow scientists to measure smaller particles more accurately, including nanoplastics that are small enough to cross biological barriers and accumulate in human tissues.
Overcoming resolution limitations: Spectroscopy of sub-30 nm nanoplastics
Researchers developed a multi-technique approach combining standard micro-Raman spectroscopy with atomic force microscopy to characterize nanoplastics as small as 25 nm, achieving a mass detection limit of 8.6 attograms and demonstrating the capability to obtain single-particle spectra from sub-30 nm polystyrene nanoparticles.
Overcoming resolution limitations: Spectroscopy of sub-30 nm nanoplastics
Researchers developed a multi-technique approach combining standard micro-Raman spectroscopy with atomic force microscopy to characterize nanoplastics as small as 25 nm, achieving a mass detection limit of 8.6 attograms and demonstrating the capability to obtain single-particle spectra from sub-30 nm polystyrene nanoparticles.