We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Hospital wastewater as a significant source of microplastics in Northern Iran: Abundance, polymer composition, and environmental risk assessment.
AI summary Read the abstract
Researchers tested wastewater from a hospital treatment plant in northern Iran, finding treatment removed about 93% of microplastic particles. Remaining plastic was mostly tiny fibers, including PVC and polyurethane, and risk calculations placed the wastewater at the highest hazard level, largely due to PVC.
BACKGROUND: Microplastics (MPs) are ubiquitous contaminants increasingly detected in aquatic environments and wastewater systems, raising concerns regarding ecosystem and human health. Hospital wastewater has been identified as a source of MPs entering municipal systems; however, data on their occurrence, characteristics, and associated risks remain limited. This study aimed to characterize MP contamination in hospital wastewater and assess the associated environmental and health risks. METHODS: Wastewater samples were collected from the influent and effluent of a hospital wastewater treatment plant in northern Iran. MPs were isolated using stainless-steel sieving followed by hydrogen peroxide (H2O2) digestion. Abundance, morphology, and size distribution were determined through microscopic examination, and chemical composition was analyzed using Scanning Electron Microscopy coupled with Energy Dispersive X-ray (SEM-EDX) and micro-Raman spectroscopy. The Pollution Load Index (PLI) and Hazard Index (HI) were calculated to evaluate contamination levels and associated risks. RESULTS: The analysis showed mean MP concentrations of 21.13 ± 12.8 particles L-1 in the influent and 1.45 ± 0.89 particles L-1 in the effluent, reflecting a removal efficiency of 93.13%. Morphologically, fibrous particles predominated (92-96%), with black as the most common color and sizes below 250 µm being the most prevalent. Identified polymer compositions included polyamide (PA), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and polyurethane (PU). Based on the calculated indices, the hospital wastewater reached a PLI of 1.86 and an HI of 1416.45, which corresponds to hazard level IV, primarily attributed to the high hazard score of PVC (5001) due to its carcinogenic monomer and additive leaching. CONCLUSIONS: Hospital wastewater is a significant source of MPs, particularly hazardous polymers such as PVC and PU. These findings highlight the need for targeted mitigation strategies, including advanced treatment processes and reduced use of toxic polymers in healthcare settings, to minimize MP discharge and protect environmental and public health.
More Papers Like This
Risk factors and characteristics of microplastics in the hospital wastewater treatment plant
AI summary Read the abstract
Researchers found that fiber-shaped microplastics dominated by polypropylene were the most common type in hospital wastewater treatment plants in Iran. Risk assessment showed that certain polymers including PET, polyamide, and polyethylene posed higher hazard scores than typical averages, making hospital wastewater a significant source of microplastic pollution.
Occurrence, identification, and discharge of microplastics from effluent and sludge of the largest WWTP in Iran—South of Tehran
AI summary Read the abstract
Researchers quantified microplastics in Iran's largest wastewater treatment plant and found significant concentrations in both effluent and sludge, identifying the facility as a pathway for microplastic release into the environment despite treatment processes.
Study on presence of microplastic pollution in the wastewater treatment plant of district 22 of Tehran
AI summary Read the abstract
Researchers investigated microplastic pollution in the wastewater treatment plant of Tehran district 22, finding significant microplastic concentrations in both influent and effluent. Despite removing a large proportion, the plant still released microplastics into the environment through treated effluent.
Abundance, characteristics, fate, and removal of microplastics during municipal wastewater treatment plant in the west of Iran: the case of Kermanshah city
AI summary Read the abstract
A three-month study of a conventional activated sludge wastewater treatment plant in Kermanshah, Iran found that while the facility removed about 64% of incoming microplastics, large quantities still passed through into the effluent — making the plant a net source of microplastic pollution to the aquatic environment. Fibers dominated incoming samples while fragments were more prevalent in the treated effluent, and polyethylene was the most common polymer detected throughout.
Distribution and abundance of microplastics in urban and industrial wastewater treatment plants in Tabriz metropolis
AI summary Read the abstract
Researchers assessed microplastic contamination in two urban and five industrial wastewater treatment plants in Tabriz, Iran, a city of 1.6 million people. Urban treatment plants removed less than 10% of microplastics, while industrial plants showed somewhat better removal rates. The study found that existing wastewater treatment infrastructure is largely ineffective at filtering out microplastics, meaning significant quantities are being released into surface waters.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.