We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Preparation and Characterization of Immediate-Release Tablets Containing Calcium Lactate Recovered from Chemically Recycled Poly(lactic acid) 3D Printing Filaments
AI summary Read the abstract
Researchers broke down used PLA plastic 3D printing filament using mild chemical treatment, turning it into calcium lactate powder. This powder was tested and then made into calcium supplement tablets, which were compared to commercial calcium tablets for quality, consistency, and toxicity in lab tests.
Polylactic acid (PLA) is one type of biodegradable plastic that can replace single-use plastic. Nevertheless, it still poses the problem of accumulation in the environment due to the slow biodegradation rate. Developing simple yet effective methods for PLA recycling and upcycling can pave the way for a circular economy and help partially solve the plastic pollution problem. In the present work, PLA filaments of different colors were chemically recycled in alkaline solutions of C1-C3 primary alcohols under mild experimental conditions (75 °C for 30 min, 1 atm). The effect of various process parameters such as depolymerization solvent media and PLA pigmentation on the percentage of PLA depolymerization and Ca lactate monomer yield was studied. PLA filament size was also investigated as a factor affecting the kinetics of PLA depolymerization. As a monomer, Ca lactate was evaluated by different characterization techniques including Fourier transform infrared spectroscopy, Nuclear Magnetic Resonance, and Atomic Absorption Spectroscopy. In addition, the powder quality was tested against US Pharmacopeia standards for acidity, heavy metal presence, hydration state, and calcium content. The recycled Ca lactate was formulated with other ingredients into Ca lactate tablets via direct compression to serve as a calcium source for preventing and treating calcium deficiencies. The tablet characteristics were compared against commercially available Ca supplements with respect to shape consistency, uniformity of calcium loading, immediate release, and cytotoxicity. The obtained findings suggest that there exists a viable, environmentally friendly avenue for utilizing PLA recycling products in the development of compounds with potential applications in the pharmaceutical domain.
More Papers Like This
Post-Consumer Recycling of Polymers for Sustainable 3D Printing Filament Material
AI summary Read the abstract
This study investigated using post-consumer recycled plastic to make 3D printing filaments as an alternative to virgin polymer materials. Recycling plastics into new products reduces the amount of plastic that enters the environment and eventually degrades into microplastics.
Material Characterizations of the Polymers Reinforced with Recycled Flexible Plastic Blends as Filament for 3D Printing
AI summary Read the abstract
Researchers characterized polymer blends made from recycled flexible plastics mixed with high-density polyethylene and polypropylene for use as 3D printing filaments. The study found that incorporating recycled plastic into filament materials is technically feasible, offering a potential pathway to reduce plastic waste by converting single-use plastics into useful manufacturing materials.
3D-Printed recycled polyethylene terephthalate (PET) sandwich structures – Influence of infill design and density on tensile, dynamic mechanical, and creep response
AI summary Read the abstract
Researchers 3D-printed structural components using filament made from recycled plastic bottles (PET) and tested different internal geometric patterns to find the strongest design, demonstrating that circular economy approaches — turning plastic waste into useful manufactured parts — can produce materials with good mechanical properties while reducing plastic pollution.
Experimental Investigation of Mechanical Properties of 3D-Printed Components Fabricated from Waste Plastic Extruded Filaments
AI summary Read the abstract
Researchers turned washed, shredded milk jugs and plastic containers into 3D-printing material and found it worked surprisingly well, about 20% less strong and stiff than standard printer plastic, but much tougher and more resistant to cracking or snapping. This matters because it shows everyday plastic trash can be reliably reused in schools, workshops, and small manufacturing settings instead of being thrown away, cutting down on plastic waste and the pollution and microplastics that come from it piling up in landfills and the environment.
Modification of Poly(lactic acid) by the Plasticization for Application in the Packaging Industry
AI summary Read the abstract
Researchers investigated the modification of poly(lactic acid) through plasticization to improve its mechanical properties for use in packaging industry applications as a biodegradable alternative to conventional plastics.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.