We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Coagulative removal of polystyrene nanoplastics using zirconium chloride: performance and mechanism
AI summary Read the abstract
Scientists found that adding a compound called zirconium chloride to water can remove nearly 99% of tiny plastic particles (nanoplastics), pieces so small they're invisible to the eye but can potentially enter our bodies and cells. This matters because current water treatment methods don't fully address nanoplastic pollution, and this study points to a promising, affordable option that water treatment plants could use to filter out these particles before they reach our drinking water.
ABSTRACT Inorganic metal coagulants have been shown to be a viable option for treating nanoplastics (NPs) in water. However, the current research on inorganic metal coagulants has primarily focused on aluminum, iron, and titanium salts, with relatively insufficient studies on zirconium salts. This study represented the first systematic investigation of polystyrene (PS) NPs removal using zirconium chloride (ZrCl4) as a coagulant. Coagulation experiments revealed that the dosage of ZrCl4 significantly influenced the removal efficiency of PS NPs in water. When the ZrCl4 concentration reached 400 mg/L, the coagulation system achieved a maximum removal efficiency of 98.9% for 25 mg/L of NPs. Results from analytical techniques, including zeta potential measurements, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, indicated that at lower ZrCl4 dosages (200 mg/L), charge neutralization and adsorption bridging were the primary coagulation mechanisms for PS NPs. Increasing the coagulant dosage significantly enhanced the sweeping flocculation effect on NPs, thereby substantially improving the removal efficiency. Experiments investigating the influence of coagulation revealed that the optimal dosage system utilizing 400 mg/L ZrCl4 exhibited significant environmental adaptability. Additionally, the presence of Ca2+ improved the coagulation efficiency of low-dose ZrCl4 for PS NPs by strengthening charge neutralization and facilitating sweeping flocculation.
More Papers Like This
Hybrid treatment of polystyrene nanoplastics by coagulation-coupled with adsorption
AI summary Read the abstract
Tiny plastic particles called nanoplastics can end up in our drinking water and may carry harmful chemicals into our bodies, making them a growing health concern. This study found that combining two water treatment steps—first clumping the particles together with a chemical, then filtering them through activated carbon (similar to charcoal filters)—removed over 99% of these plastic particles, far better than either method alone. This suggests water treatment plants could use this combined approach to more effectively protect drinking water from nanoplastic contamination.
Enhanced coagulation of nanoplastics: impact of complex water matrices on nanoplastics removal
AI summary Read the abstract
Scientists tested whether a common water treatment method, coagulation, can remove tiny nanoplastics from drinking water sources that also contain natural substances like organic matter and clay. They found that using enough treatment chemical (10 ppm) removed over 98% of nanoplastics regardless of what else was in the water, offering practical guidance for making tap water safer.
Mechanisms of Natural Organic Matter Influencing on Coagulation Process for Nanoplastics Removal from Water
AI summary Read the abstract
Scientists found a water treatment method that removes over 94% of nanoplastics (tiny plastic particles too small to see) from water using common purification chemicals. However, they discovered that natural substances already in water, like decaying plant matter and proteins from organic material, can significantly weaken this cleanup process, with one protein-based substance cutting removal effectiveness by nearly 30%. This matters because it shows that real-world water treatment plants may need to account for these natural substances to reliably filter out nanoplastics before they reach our drinking water.
Efficient removal of polyethylene and polyvinyl chloride microplastics from water using a modified coagulation process supported by the addition of a surfactant
AI summary Read the abstract
Scientists found a way to remove tiny plastic particles (microplastics) from tap water more effectively by adding a soap-like ingredient called a surfactant to the standard water treatment process. This tweak boosted plastic removal to over 95%, which matters because microplastics have been showing up in our drinking water and bodies, and better filtering methods could help reduce our exposure to them before they even reach the tap.
The suitability and mechanism of polyaluminum-titanium chloride composite coagulant (PATC) for polystyrene microplastic removal: Structural characterization and theoretical calculation
AI summary Read the abstract
Researchers developed a new coagulant (a chemical that clumps particles together for removal) that effectively removes polystyrene microplastics from water. The composite coagulant worked better than standard water treatment chemicals across a wider range of water conditions, using hydrogen bonding to capture the plastic particles. This technology could improve drinking water treatment plants' ability to filter out microplastics before water reaches consumers.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.