We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
On the Effect of Non-Thermal Atmospheric Pressure Plasma Treatment on the Properties of PET Film
AI summary Read the abstract
Researchers treated polyethylene terephthalate (PET) films with non-thermal atmospheric plasma and then buried them in soil, finding that the combined physical and biological treatment altered surface chemistry, increased wettability, and reduced crystallinity — suggesting plasma pre-treatment can prime PET for faster environmental biodegradation.
The aim of the work was to investigate the effect of non-thermal plasma treatment of an ultra-thin polyethylene terephthalate (PET) film on changes in its physicochemical properties and biodegradability. Plasma treatment using a dielectric barrier discharge plasma reactor was carried out in air at room temperature and atmospheric pressure twice for 5 and 15 min, respectively. It has been shown that pre-treatment of the PET surface with non-thermal atmospheric plasma leads to changes in the physicochemical properties of this polymer. After plasma modification, the films showed a more developed surface compared to the control samples, which may be related to the surface etching and oxidation processes. After a 5-min plasma exposure, PET films were characterized by the highest wettability, i.e., the contact angle decreased by more than twice compared to the untreated samples. The differential scanning calorimetry analysis revealed the influence of plasma pretreatment on crystallinity content and the melt crystallization behavior of PET after soil degradation. The main novelty of the work is the fact that the combined action of two factors (i.e., physical and biological) led to a reduction in the content of the crystalline phase in the tested polymeric material.
More Papers Like This
Effect of cold plasma pretreatment on biodegradation of high-density polyethylene (HDPE) and polystyrene (PS)
AI summary Read the abstract
This study found that cold atmospheric plasma pretreatment of high-density polyethylene and polystyrene significantly increases surface wettability and promotes subsequent microbial biodegradation, suggesting plasma treatment as a practical strategy to accelerate plastic breakdown.
Pretreatment of polyethylene terephthalate (PET) using physicochemical methods and their effects on biodegradation
AI summary Read the abstract
This study evaluated how UV irradiation, thermal oxidation, and particle size reduction affect the biodegradability of PET plastic, finding that thermal oxidation at 80°C improved enzymatic breakdown while UV irradiation paradoxically hindered it by increasing crystallinity, with small thermally oxidized particles achieving the highest degradation rates of up to 21%.
Synergistic Effects of Plasma Treatment and Prooxidants on PE/PCL Blend Biodegradation
AI summary Read the abstract
Researchers combined radiofrequency plasma treatment with a pro-oxidant additive in polyethylene/polycaprolactone (PE/PCL) blends to enhance biodegradation, finding that plasma treatment significantly increased surface hydrophilicity and the combination with the pro-oxidant produced the greatest weight loss over 24 months of composting. These synergistic effects suggest a promising approach for improving the environmental degradability of otherwise persistent polyethylene-based materials.
Study on the influence of advanced treatment processes on the surface properties of polylactic acid for a bio-based circular economy for plastics
AI summary Read the abstract
Researchers evaluated ultrasonication, UV photodegradation, and plasma treatment as pre-processing methods to enhance the biodegradability of polylactic acid (PLA) plastic, finding that all three alter surface chemistry and oxidation in ways that could help microorganisms more effectively break down the polymer.
Evaluation of Pretreatment Strategies and Combinations of Enzymes for Degradation of Polyethylene Terephthalate
AI summary Read the abstract
This study systematically evaluated how pretreatment methods and enzyme combinations affect the enzymatic breakdown of polyethylene terephthalate (PET) plastic. Reducing crystallinity and modifying the plastic surface were found to be the most effective strategies for accelerating monomer release. The results provide a practical framework for optimizing enzymatic PET recycling processes at scale.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.