We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Sustainable Hybrid Lightweight Aggregate Concrete Using Recycled Expanded Polystyrene
AI summary Read the abstract
Researchers developed lightweight concrete by incorporating recycled expanded polystyrene (EPS) waste as an aggregate, finding that the hybrid material reduced structural weight while offering a practical pathway to divert billions of kilograms of EPS from landfills annually.
Global concrete production, reaching 14×1013m3/year, raises environmental concerns due to the resource-intensive nature of ordinary Portland cement (OPC) manufacturing. Simultaneously, 32.7×109 kg/year of expanded polystyrene (EPS) waste poses ecological threats. This research explores the mechanical behavior of lightweight concrete (LWAC) using recycled EPS manufactured with a hybrid cement mixture (OPC and alkali-activated cement). These types of cement have been shown to improve the compressive strength of concrete, while recycled EPS significantly decreases concrete density. However, the impact of these two materials on the LWAC mechanical behavior is unclear. LWAC comprises 35% lightweight aggregates (LWA)-a combination of EPS and expanded clays (EC) - and 65% normal-weight aggregates. As a cementitious matrix, this LWAC employs 30% OPC and 70% alkaline-activated cement (AAC) based on fly ash (FA) and lime. Compressive strength tests after 28 curing days show a remarkable 48.8% improvement, surpassing the ACI 213R-03 standard requirement, which would allow this sustainable hybrid lightweight aggregate concrete to be used as structural lightweight concrete. Also obtained was a 21.5% reduction in density; this implies potential cost savings through downsizing structural elements and enhancing thermal and acoustic insulation. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy reveal the presence of C-S-H, C-(A)-S-H, and N-A-S-H gels. However, anhydrous products in the hybrid LWAC suggest a slower reaction rate. Further investigation into activator solution dosage and curing temperature is recommended for improved mechanical performance on the 28th day of curing. This research highlights the potential for sustainable construction incorporating waste and underscores the importance of refining activation parameters for optimal performance.
More Papers Like This
Enhancing mechanical and thermal performance of EPS lightweight concrete using condensed silica fume for sustainable building applications
AI summary Read the abstract
Adding condensed silica fume (CSF) at up to 8 wt% to expanded polystyrene lightweight concrete significantly improved early-age compressive strength and extended heat transfer time lag without meaningfully changing thermal conductivity. This research supports more sustainable building materials by combining recycled plastic foam waste with industrial by-products to reduce concrete density while preserving insulating performance.
Studi Eksperimental Penggunaan Butiran Expanded Polystyrene (EPS) sebagai Pengganti Pasir pada Campuran Bata Beton
AI summary Read the abstract
Researchers experimentally evaluated the use of expanded polystyrene (EPS) granules as a partial sand replacement in concrete brick mixtures, measuring density and stress-strain characteristics of the resulting composite material. They found that increasing EPS content reduced material density and altered mechanical strength properties, offering potential for producing lighter, more eco-friendly building blocks from EPS waste.
Reuse of mechanically recovered polypropylene for production of cement matrix composite material
AI summary Read the abstract
Researchers investigated the use of mechanically recovered polypropylene plastic waste as aggregate within cement-matrix composite materials, demonstrating that the construction industry can serve as a viable recycling pathway for plastic waste while reducing demand for virgin raw materials.
Mechanical and Microstructural Evaluation of Compacted Mixtures of Tropical Soils with Expanded Polystyrene (EPS) Waste for Sustainable Construction Applications
AI summary Read the abstract
This research characterized microplastic contamination in marine turtles from the Mediterranean Sea, analyzing plastic ingestion in multiple species collected as bycatch or from strandings. The study documents high plastic burdens in Mediterranean sea turtles, reflecting the region's elevated marine plastic pollution levels.
Performance Characterization and Evaluation of Innovative Cement Mortars and Concretes Made with Recycled EPS
AI summary Read the abstract
Not relevant to microplastics — this study evaluates the mechanical strength and thermal insulation performance of cement mortars and concretes that incorporate recycled expanded polystyrene (EPS) beads as aggregate, focused on construction materials.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.