We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Performance Characterization and Evaluation of Innovative Cement Mortars and Concretes Made with Recycled EPS
Summary
Not relevant to microplastics — this study evaluates the mechanical strength and thermal insulation performance of cement mortars and concretes that incorporate recycled expanded polystyrene (EPS) beads as aggregate, focused on construction materials.
The construction industry involves some of the activities with the highest consumption of raw materials and significant waste production. According to the European Commission, it requires large quantities of resources, representing approximately 50% of all extracted materials, and accounting for over 35% of the EU’s total waste production. In particular, the production and use of concrete, as well as that of EPS (expanded polystyrene), largely exploited for energy-efficient buildings, involve a substantial amount of extracted raw materials and waste. This study focuses on the development of construction materials, such as lightweight and thermally efficient mortars and concretes, incorporating recycled EPS (R-EPS) instead of fine aggregates. Mixtures were designed by partially or completely replacing the fine aggregate with R-EPS on a volume basis. All designed mortars exhibit compressive strength exceeding the minimum values required by Italian legislation and show thermal performance improvements of up to 89.49% compared to the reference mortar. Similarly, the concretes demonstrate strengths compliant with regulations and exhibit thermal characteristic enhancements, ranging from 27.68% for structural lightweight mixes to 74.58% for non-structural ones.
Sign in to start a discussion.
More Papers Like This
Experimental Tests on Lightweight Cement Mortar and Concrete with Recycled Plastic Wastes
This paper is not relevant to microplastics research — it tests the mechanical properties of cement mortar and concrete incorporating recycled plastic waste granules as aggregate substitutes, a construction materials engineering study.
Effect of composite polystyrene granular thermal insulation mortar on thermal energy storage of building energy consumption
Researchers simulated the effect of adding polystyrene granules to building insulation mortar on thermal energy storage and overall building energy use. The composite mortar improved insulation performance, suggesting polystyrene waste materials could be repurposed in construction to reduce building energy consumption.
Studi Eksperimental Penggunaan Butiran Expanded Polystyrene (EPS) sebagai Pengganti Pasir pada Campuran Bata Beton
Researchers experimentally evaluated the use of expanded polystyrene (EPS) granules as a partial sand replacement in concrete brick mixtures, measuring density and stress-strain characteristics of the resulting composite material. They found that increasing EPS content reduced material density and altered mechanical strength properties, offering potential for producing lighter, more eco-friendly building blocks from EPS waste.
Recycled Mixed Plastic Fine Aggregate in Cement Concrete
Cement concrete mixtures incorporating mixed post-consumer recycled plastic as fine aggregate were characterized, finding that an optimized blend of polymer types produced workable concrete with mechanical properties suitable for construction applications.
EPS waste management from coastal cleaning actions: identification of contamination sources, collection, treatment, and re-use in cement-based materials
This study developed an integrated approach for managing expanded polystyrene (EPS) waste from coastal cleanup activities, including collection, treatment, and incorporation into cement-based building materials. Reusing EPS waste from beaches reduces the amount of plastic that breaks down into microplastics in marine environments.