We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Development of PCL/PMMA and PCL/PEG Polymeric Film as Potential for Algae Removal
AI summary Read the abstract
This study developed composite polymer films of PCL/PMMA and PCL/PEG as a novel approach to mitigating harmful algal blooms, finding that a 1:0.4 PCL/PMMA film achieved the highest algae removal efficiency of 10.6% within 15 minutes, outperforming PCL/PEG blends across all tested ratios.
Human activities generate excess nutrients that can lead to harmful algal blooms (HABs), which are increasing in number and severity worldwide, causing significant ecological problems and substantial economic losses. Cost-effective polymeric films with ease of operation represent a promising and sustainable alternative to traditional HABs mitigation methods in various aquatic systems. In this study, composite polymer films, specifically polycaprolactone with poly(methyl methacrylate) (PCL/PMMA) and polycaprolactone with polyethylene glycol (PCL/PEG), were employed for algae mitigation. To the best of our knowledge, no prior studies have explored the application of PCL/PMMA and PCL/PEG composite polymer films for algae mitigation. These films were prepared using solvent casting methods. The successfully prepared film ratios were 1:0.2, 1:0.4, and 1:0.6. ATR-FTIR analysis confirmed the successful preparation of PCL/PMMA and PCL/PEG by detecting characteristic functional group peaks corresponding to each pure polymer, suggesting the possibility of non-covalent bond interactions between the polymers in the composites. Thermal analysis (TGA) indicated increased thermal stability for all film ratios. Algae mitigation studies form light microscope analysis showed the presence of algal cells within the composite. Removal efficiency improved with higher ratios of these composite polymer films, with PCL/PMMA outperforming PCL/PEG. Notably, the 1:0.4 PCL/PMMA film exhibited highly efficient algae removal, with interactions between microalgae cells and the film observed within a shorter time. This film achieved the highest removal efficiency of 10.6% within a 15-min interval compared to others. From this preliminary study, the composite polymer films show good potential and promising candidate for mitigating algae-related issues.
More Papers Like This
Interplay of plastic pollution with algae and plants: hidden danger or a blessing?
AI summary Read the abstract
Researchers tested the ability of three microalgae species to remove microplastics from water through bioadhesion, finding that all three species could adsorb particles onto their surfaces. Removal efficiency depended on particle size, surface charge, and algae cell morphology.
Degradation of Some Polymeric Materials of Bioreactors for Growing Algae
AI summary Read the abstract
Exposure of PMMA, polycarbonate, and PET polymer panels to 70 days of bioreactor conditions caused an average 15% loss in optical transparency, increased surface roughness, and reduced contact angles across all materials, with PET performing worst and PMMA showing the highest optical stability. This accelerated aging study directly documents how commonly used transparent plastics degrade under aquatic and light exposure, producing surface microstructural changes consistent with early-stage microplastic and nanoplastic generation.
Utilizing Chlorella vulgaris algae as an eco-friendly coagulant for efficient removal of polyethylene microplastics from aquatic environments
AI summary Read the abstract
Researchers tested the green algae Chlorella vulgaris as an eco-friendly coagulant for removing polyethylene microplastics from water. Using optimized experimental conditions, they achieved a removal rate of nearly 99% under the best parameters. The study suggests that algae-based coagulation offers a cost-effective and sustainable alternative to chemical methods for cleaning microplastic-contaminated water.
Removal of Microplastics from Industrial Wastewater Using Microalgae
AI summary Read the abstract
This review examines the use of microalgae as a sustainable biological approach for removing microplastics from wastewater, covering mechanisms of MP attachment to algal surfaces, factors affecting removal efficiency, and prospects for integrating algae cultivation with wastewater treatment.
Evaluating the impact of innovative algae- based membrane bioreactors against the emerging microplastic crisisin combating water pollution
AI summary Read the abstract
This study evaluated algae-based membrane bioreactors for removing microplastics and other emerging contaminants from wastewater, finding that combining algal biomass with membrane filtration improved MP removal efficiency compared to conventional biological treatment alone.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.