We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
20 resultsShowing papers similar to Low Environmental Impact Remediation of Microplastics: Visible-Light Photocatalytic Degradation of PET Microplastics Using Bio-Inspired C,N-TiO2/SiO2 Photocatalysts
ClearLow environmental impact remediation of microplastics: Visible-light photocatalytic degradation of PET microplastics using bio-inspired C,N-TiO2/SiO2 photocatalysts
Researchers developed a new light-powered cleaning method using modified titanium dioxide to break down PET microplastics in water. The process works under visible light at room temperature, making it more practical and environmentally friendly than other cleanup approaches. This matters because PET is one of the most common plastics found polluting waterways.
First Insights into Photocatalytic Degradation of HDPE and LDPE Microplastics by a Mesoporous N–TiO2 Coating: Effect of Size and Shape of Microplastics
A nitrogen-doped titanium dioxide photocatalyst successfully degraded high-density and low-density polyethylene microplastics under visible light, with smaller particles showing greater degradation than larger ones or film-shaped particles. The study establishes a foundation for visible-light photocatalysis as a potential strategy for removing microplastics from water.
Bio-carbon quantum dot modified TiO 2 nanocrystals for photocatalytic degradation of PLA and PET microplastics
Researchers developed a photocatalyst by modifying titanium dioxide nanocrystals with bio-based carbon quantum dots to degrade PET and PLA microplastics under visible light. The composite achieved degradation rates of 28.9% for PET and 59.8% for PLA microplastics within 48 hours in alkaline conditions. The study demonstrates a promising approach for breaking down common microplastic pollutants using sunlight-driven catalysis.
Degradation of Emerging Plastic Pollutants from Aquatic Environments Using TiO2 and Their Composites in Visible Light Photocatalysis
This review examines how titanium dioxide-based photocatalysts can degrade microplastics and nanoplastics under visible light conditions. Researchers found that while some composite materials achieved complete degradation of polystyrene particles, overall effectiveness remains limited at the laboratory scale. The study identifies key challenges and proposes future directions for developing more efficient photocatalytic approaches to plastic pollution remediation in water.
TiO2-based photocatalysts for the degradation of microplastics in aquatic environments
Researchers synthesized TiO2-based photocatalysts via sol-gel and hydrothermal methods and characterized their morphology and photocatalytic properties for the degradation of microplastics in aqueous environments, optimizing catalyst formulations to improve efficiency and assessing their potential as an environmentally friendly advanced treatment for waterborne microplastic pollution.
Microplastic pollution reduction by a carbon and nitrogen-doped TiO2: Effect of pH and temperature in the photocatalytic degradation process
Scientists tested a carbon and nitrogen-doped TiO2 photocatalyst for degrading microplastics and found that degradation efficiency depended strongly on pH and temperature, with optimal conditions achieving significant surface mineralization of tested polymer types.
Synthesizing a Ternary TiO 2 @g‐C 3 N 4 /UiO‐66 Photocatalyst From Waste Polyethylene Terephthalate Plastic to Treat Polystyrene Microplastics in Polluted Water
Scientists created a photocatalyst using recycled plastic bottles (PET) and used it to break down polystyrene microplastics in water under visible light, achieving 90% degradation within 30 hours. The approach cleverly uses plastic waste as both a raw material and a target, turning one pollution problem into a tool for solving another. This proof-of-concept suggests a potentially scalable method for removing microplastics from water using sunlight-driven chemistry.
Novel CuMgAlTi-LDH Photocatalyst for Efficient Degradation of Microplastics under Visible Light Irradiation
Scientists developed a new photocatalyst material that breaks down polystyrene and polyethylene microplastics under visible light. The catalyst achieved significant degradation rates and worked through generating reactive oxygen species that attack plastic surfaces. This technology offers a promising green approach to removing microplastic pollution from water.
Photocatalytic degradation of polyethylene microplastics by copper-doped titanium dioxide nanoparticles
Researchers investigated photocatalytic degradation of polyethylene microplastics using copper-doped titanium dioxide nanoparticles as an efficient approach to breaking down aquatic plastic pollution, addressing the limitations of conventional removal methods that only achieve surface-level reduction.
Investigation of the efficiency of several TiO2 microstructures for the photocatalytic degradation of nanoplastics.
This study tested the efficiency of several TiO2 microstructures as photocatalysts for degrading nanoplastics in aquatic environments. Results identified the most effective TiO2 configurations for breaking down sub-micron plastic fragments under light exposure.
Integration of Photocatalysis and Membrane Technology as a Hybrid System for Microplastic Degradation in Wastewater
Researchers evaluated a hybrid system combining TiO2 photocatalysis with membrane filtration for degrading microplastics in wastewater. The photocatalytic membrane reactor demonstrated effective removal and degradation of polyethylene, polypropylene, and PET microplastics, suggesting that integrated photocatalytic-membrane systems could improve microplastic removal beyond what conventional wastewater treatment achieves.
Indirect daylight oxidative degradation of polyethylene microplastics by a bio-waste modified TiO2-based material
Researchers developed an innovative method to break down polyethylene microplastics using a titanium oxide-based material combined with biowaste, requiring only indirect daylight rather than direct UV or heat. The approach achieved measurable oxidative degradation of the chemically resistant plastic under ambient conditions. The study suggests this low-energy photocatalytic method could be a practical tool for treating microplastic pollution in environmental settings.
Investigation of the efficiency of several TiO2 microstructures for the photocatalytic degradation of nanoplastics.
Researchers tested the efficiency of multiple titanium dioxide microstructures for photocatalytic degradation of nanoplastics in aquatic environments, addressing the growing problem of sub-micron plastic fragments in global water systems. TiO2-based photocatalysis showed varying effectiveness depending on catalyst structure and particle properties.
Degradation of Microplastic Residuals in Water by Visible Light Photocatalysis
Researchers demonstrated that zinc oxide-based photocatalysts activated by visible light can degrade low-density polyethylene microplastic residues in water. This photocatalytic approach could offer an energy-efficient method for reducing microplastic contamination in aquatic environments.
Mechanistic vision on polypropylene microplastics degradation by solar radiation using TiO2 nanoparticle as photocatalyst
Researchers demonstrated that titanium dioxide nanoparticles acting as a photocatalyst under sunlight can degrade polypropylene microplastics in water. After 50 hours of exposure, the microplastics lost about 50% of their weight as the sunlight-activated catalyst broke down the plastic's chemical structure. The study offers a potential approach for using solar-powered photocatalysis to address microplastic contamination in aquatic environments.
Processing of bio-based photocatalytic sponge-like structures containing C,N-TiO2 colloidally dispersed onto cellulose nanofibers for microplastic remediation
Researchers immobilized C,N-doped TiO2 photocatalyst onto cellulose nanofiber sponges derived from agricultural biomass, creating a bio-based photocatalytic material that degrades microplastics under light while being easily recoverable without centrifugation or filtration.
Visible light photocatalytic degradation of HDPE microplastics using vanadium-doped titania
Researchers tested vanadium-doped titanium dioxide photocatalysts for degrading high-density polyethylene (HDPE) microplastics under visible light, finding that vanadium doping extended the photocatalytic response into the visible spectrum and enhanced degradation rates compared to undoped TiO2. The study advances solar-driven microplastic degradation as a potential remediation strategy.
Microplastic Pollutant Degradation in Water Using Modified TiO2 Photocatalyst Under UV-Irradiation
This study tested modified titanium dioxide (TiO2) photocatalysts for their ability to degrade microplastic pollutants in water using light-driven oxidation. Modified TiO2 showed improved photocatalytic activity against microplastics compared to unmodified TiO2, which suffers from limited efficiency under visible light.
Preparation of heterojunction C3N4/WO3 photocatalyst for degradation of microplastics in water
Researchers synthesized a carbon nitride/tungsten oxide heterojunction photocatalyst that effectively degrades PET microplastics in water while simultaneously generating hydrogen, offering a dual-benefit approach to addressing plastic pollution through photocatalysis.
The Role of the Reactive Species Involved in the Photocatalytic Degradation of HDPE Microplastics Using C,N-TiO2 Powders
Researchers used carbon and nitrogen co-doped titanium dioxide photocatalysts to degrade high-density polyethylene microplastics under simulated solar light, identifying hydroxyl radicals and superoxide anions as the primary reactive species responsible for surface oxidation and chain scission of the polymer.