We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
20 resultsShowing papers similar to Effects of different oxidants on the behaviour of microplastic hetero-aggregates
ClearReactivity of four model microplastics with ozone.
Researchers investigated the reactivity of four model microplastic types with ozone, examining how ozone treatment affects the physicochemical properties of microplastics as a potential water treatment strategy for degrading plastic particles.
Changes in physical and chemical properties of microplastics by ozonation
Researchers examined how ozone treatment in water systems changes the physical and chemical properties of six common types of microplastics. They found that ozonation altered surface roughness, wettability, and chemical composition of the plastics, with some types being more affected than others. The findings are important because these changes could influence how microplastics interact with other pollutants and organisms in treated water.
Pre-oxidization-induced change of physicochemical characteristics and removal behaviours in conventional drinking water treatment processes for polyethylene microplastics
Researchers investigated how pre-oxidation treatments alter the physicochemical properties of polyethylene microplastics and found that oxidation changed surface characteristics and influenced removal efficiency during conventional drinking water treatment processes.
Ozone-mediated breakdown of microplastics in aqueous environments
Researchers examined how ozone-based advanced oxidation processes break down microplastics in water treatment settings. They found that while ozone can degrade certain plastics, the effectiveness varies depending on particle size, polymer type, and treatment conditions, and the process may generate nanoplastic byproducts. The study highlights both the promise and limitations of ozone treatment as a strategy for removing microplastics from wastewater.
A comparative study on the stability and coagulation removal of aged vs. nonaged nanoplastics in surface water
Researchers used palladium-doped nanoplastics as tracers to compare how environmentally aged and pristine nanoplastics behave during water treatment coagulation. They found that ozone-aged nanoplastics developed more oxygen-containing surface groups, making them harder to remove through conventional coagulation, while solar-aged particles showed mainly physical changes. The study suggests that current drinking water treatment processes may be less effective at removing aged nanoplastics than fresh ones.
The effect of Ozonation on the chemical structure of microplastics
Ozone treatment of microplastics in water caused oxidative changes to polymer surfaces including carbonyl group formation and surface cracking, which altered hydrophobicity and potentially increased the capacity of treated particles to adsorb contaminants, suggesting that ozonation in water treatment may chemically transform rather than eliminate microplastic hazards.
Understanding and Improving Microplastic Removal during Water Treatment: Impact of Coagulation and Flocculation
Researchers systematically tested coagulation and flocculation for removing microplastics from drinking water, finding that removal efficiency depended strongly on plastic particle size and whether particles had been weathered, with smaller pristine particles being the hardest to remove.
Unveiling the optical and molecular characteristics of aging microplastics derived dissolved organic matter transformed by UV/chlor(am)ine oxidation and its potential for disinfection byproducts formation
Researchers studied how UV light and common water disinfection chemicals break down microplastics in water and found that different treatment methods produce different types of dissolved organic matter from the plastic. Some treatment combinations, particularly UV with chlorine, created byproducts that could form harmful disinfection byproducts when water is later chlorinated. This is important because it means water treatment processes might unintentionally create new toxic compounds from the microplastics already present in water.
Secondary pollution of microplastic hetero-aggregates after chlorination: Released contaminants rarely re-adsorbed by the second-formed hetero-aggregates
Researchers found that microplastic hetero-aggregates in urban water act like 'time bombs': chlorination during water treatment destroys the aggregates and triggers the release of accumulated organic contaminants and microbial metabolites that are poorly re-adsorbed afterward.
Heteroaggregation of nanoplastic particles in the presence of inorganic colloids and natural organic matter
Nanoplastics were found to heteroaggregate extensively with inorganic colloids and natural organic matter in both freshwater and marine conditions, altering their size, surface charge, and settling behavior compared to pristine particles. The study demonstrates that nanoplastic behavior in natural waters is dominated by interactions with other environmental constituents rather than the intrinsic properties of the plastic alone.
Modifications of ultraviolet irradiation and chlorination on microplastics: Effect of sterilization pattern
Researchers found that both UV irradiation and chlorination used in drinking water treatment alter the surface properties, size distribution, and chemical composition of microplastics, with combined treatments producing greater modifications and potentially increasing the release of plastic additives and adsorbed contaminants.
Effective Removal of Microplastics Using a Process of Ozonation Followed by Flocculation with Aluminum Sulfate and Polyacrylamide
Researchers tested a two-step water treatment process combining ozonation with flocculation to remove microplastics. They found that ozone pretreatment roughened the microplastic surfaces and added chemical groups that dramatically improved removal rates, from 40% to 91%, during the subsequent flocculation step. The findings suggest this combined approach could significantly enhance microplastic removal in conventional water treatment plants.
The effects of uv-radiation on the removal of microplastics in water using agglomeration-micro-flotation
Researchers investigated how UV radiation affects the surface wettability of six types of microplastics and its influence on removal efficiency via agglomeration-micro-flotation in water. UV treatment altered surface properties of the microplastics, and results showed that the modified wettability affected flotation performance, offering insights into using UV pre-treatment to enhance microplastic removal in water treatment systems.
Impact of Chlorine or UV/H2O2 on Microplastics Under Conditions Representative of Drinking Water Treatment
Researchers exposed low- and high-density polyethylene microplastics to chlorine and UV/H2O2 at drinking-water-relevant doses and found that surface changes and cytotoxicity increases reported in earlier studies occurred only at far higher doses than used in practice.
Micro- and nanoplastics removal from water and solid matrices: Technologies, challenges, and future perspectives
Researchers reviewed a decade of research on micro- and nanoplastic removal technologies across water and solid matrices, finding that conventional water treatment achieves over 80% microplastic removal but transfers most particles to sludge rather than degrading them, while advanced oxidation processes show strong degradation potential under controlled but not yet real-world conditions.
Impact of chlorine and UV/H2O2 on microplastics in drinking water
Using chlorine and UV/hydrogen peroxide at dosages realistic for actual drinking water treatment plants, this study assessed whether standard disinfection processes alter microplastics in tap water. The work addresses a critical public health question — whether the water treatment people rely on to make tap water safe actually removes or changes the microplastics that have been detected in treated drinking water.
Ozonation facilitates the aging and mineralization of polyethylene microplastics from water: Behavior, mechanisms, and pathways
Ozonation was shown to accelerate the aging and partial mineralization of polyethylene microplastics, with surface oxidation creating more reactive particles susceptible to further degradation. The study provides mechanistic insight into how advanced oxidation processes could contribute to microplastic breakdown in water treatment.
Effects of UV-based oxidation processes on the degradation of microplastic: Fragmentation, organic matter release, toxicity and disinfection byproduct formation
This study examined how UV-based water treatment processes break down microplastics, finding that while the treatments fragment the plastics into smaller pieces, they also release potentially toxic organic compounds. The smaller fragments and released chemicals may actually pose greater risks than the original microplastics. This is an important finding because it suggests that some water purification methods could unintentionally make microplastic pollution more hazardous to human health.
Microplastics Degradation in Water: A Review of Advanced Oxidative Processes and Ozonation for Effective Treatment
This review examines advanced oxidative processes (AOPs) and ozonation as emerging technologies for degrading microplastics in drinking water and aquatic environments, covering both identification and quantification methods alongside treatment efficacy. The authors assess the challenges and capabilities of these approaches in addressing the growing concern over microplastic contamination in water supplies.
Comparison of surficial modification of micro-sized polyethylenein between by UV/O3 and UVO submerged system
Researchers compared ozone and UV oxidation methods for chemically modifying the surface of polyethylene microplastics in water, finding that different treatment combinations create distinct surface changes. Understanding how weathering alters microplastic surfaces is important for predicting their environmental behavior and toxicity.