We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to The Enhancement Effect and Mechanism of Natural Clay on the Removal of Polyethylene Microplastics by Electrocoagulation
ClearReduction of Microplastic in Wastewater Via Electrocoagulation Process
This review examines how electrocoagulation, a water treatment process that uses electrical current to clump contaminants together, can remove microplastics from wastewater. Researchers found that the technique can achieve high removal rates for various types and sizes of microplastic particles. The study highlights electrocoagulation as a promising and relatively simple addition to conventional wastewater treatment for addressing microplastic pollution.
Coagulation technologies for separation of microplastics in water: current status
This review examines how coagulation water treatment technologies can remove microplastics from water. Conventional coagulation achieves 8-98% removal efficiency while electrocoagulation achieves 8-99%, depending on conditions, offering a potentially effective approach for reducing microplastics in drinking water and wastewater.
Enhancing Microplastics Removal from Wastewater Using Electro-Coagulation and Granule-Activated Carbon with Thermal Regeneration
Combining electrocoagulation with granular activated carbon treatment significantly improved microplastic removal from wastewater compared to standard treatment, achieving removal efficiencies above 95% and offering a feasible enhancement for sewage treatment plants.
Degradation of microplastics by electrocoagulation technology: Combination oxidation and flocculation effects
Researchers evaluated electrocoagulation technology for removing four common types of microplastics from water and discovered that the process works through both oxidation and flocculation mechanisms. Flocculation accounted for the majority of removal (69-77%), while electrochemical oxidation via hydroxyl radicals contributed an additional 8-21% depending on the plastic type. The study found that PVC and polypropylene were removed most effectively due to their hydrophilic properties, and a neutral pH of 7 provided the best balance between the two removal mechanisms.
Title Perniciousness of microplastics in the ocean and electrocoagulation in microplastic removal in effluent treatment process
This study reviewed the environmental harms of microplastics in the ocean and assessed electrocoagulation as a removal technology for wastewater treatment. Electrocoagulation showed promise as an effective and scalable method for removing microplastics from wastewater before ocean discharge.
Examining Current and Future Applications of Electrocoagulation in Wastewater Treatment
This review provides a comprehensive look at electrocoagulation, an electricity-based water treatment technique that can remove a wide range of pollutants including microplastics from wastewater. The analysis covers decades of research showing the method is effective, relatively low-cost, and environmentally friendly compared to chemical treatments. The authors identify microplastic removal as one of the promising newer applications of this technology.
Removal of Microplastics from Wastewater by Methods of Electrocoagulation and Adsorption
This review examines electrocoagulation and adsorption methods for removing microplastics from wastewater, comparing them against conventional physical, chemical, and biological approaches in terms of removal efficiency, cost, and practical scalability.
Title Perniciousness of microplastics in the ocean and electrocoagulation in microplastic removal in effluent treatmentprocess.
This report reviews the environmental harm of ocean microplastics and evaluates electrocoagulation as a wastewater treatment technology for microplastic removal, examining its dissolution, coagulation, and flocculation mechanisms and the factors affecting its efficiency.
Removal of Microbeads from Wastewater Using Electrocoagulation
Researchers tested electrocoagulation as a method for removing microbeads from wastewater, finding it effectively reduced microbead concentrations and offering it as a promising complement to conventional wastewater treatment technologies.
Fate and transformation of microplastics due to electrocoagulation treatment: Impacts of polymer type and shape
Researchers tested how electrocoagulation, a cost-effective water treatment method, removes and transforms different types and shapes of microplastics. They found that the technique removed over 88 percent of microplastics overall, with fibers being captured more effectively than fragments. The treatment also caused physical and chemical changes to the plastic surfaces, indicating that electrocoagulation both removes and partially degrades microplastic pollutants.
Enhancement of Water Quality Parameters with Microplastics via Electrocoagulation
Researchers investigated the use of electrocoagulation to enhance water quality parameters and remove microplastics from water, comparing primary and secondary microplastic types. They found that electrocoagulation effectively reduced microplastic concentrations alongside other water quality parameters, demonstrating its potential as an integrated treatment technology for microplastic-contaminated water.
Comparative evaluation of activated sludge and electrocoagulation for microplastics removal from sewage
Researchers compared conventional activated sludge treatment and electrocoagulation for microplastic removal from sewage in Egypt, finding that activated sludge achieved 83% removal while subsequent electrocoagulation treatment raised overall removal to over 91%, with polyethylene and polypropylene confirmed as the dominant polymer types in both influent and effluent.
Influence of typical clay minerals on aggregation and settling of pristine and aged polyethylene microplastics
Researchers investigated how common clay minerals affect the aggregation and settling behavior of pristine and aged polyethylene microplastics in water. They found that high salt concentrations promoted the settling of microplastics when clay minerals were present, and that electrostatic repulsion was the dominant force governing interactions between plastics and clay particles. The findings provide new insights into how microplastics are transported and deposited in natural water systems.
Microplastic Removal in Wastewater Treatment Plants (WWTPs) by Natural Coagulation: A Literature Review
This review examines how natural coagulants, substances derived from plants and other natural sources, can be used to remove microplastics during wastewater treatment. Natural coagulants are safer and cheaper than chemical alternatives, and show promise for capturing microplastic particles. Since wastewater treatment plants are a major source of microplastics entering waterways, better removal methods could reduce the amount of plastic pollution reaching the environment and eventually human food and water supplies.
Removal of microplastics from wastewater through electrocoagulation-electroflotation and membrane filtration processes
Researchers investigated electrocoagulation-electroflotation and membrane filtration for removing microplastics from wastewater, finding that combining these processes effectively recovers microplastic particles from treatment plant effluent.
Investigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.
Electrocoagulation as a Possible Treatment for Wastewater Contaminated with Microplastics - A Review
This review examined electrocoagulation and hybrid membrane technologies as innovative approaches for removing microplastics from wastewater, noting that MPs are omnipresent pollutants capable of biomagnification. The review covered the effectiveness of electrochemical processes, advanced oxidation, and membrane filtration systems including their combination for enhanced microplastic removal.
The Study of Removal of Polyvinyl Chloride (PVC) Particles from Wastewater through Electrocoagulation
Researchers investigated electrocoagulation as a method for removing polyvinyl chloride (PVC) microplastic particles from wastewater, evaluating its efficiency as a low-cost treatment approach using simple chemicals and accessible equipment.
Enhancing microplastic removal from natural water using coagulant aids
Researchers tested different chemical treatments for removing microplastic beads from natural water and found that polyaluminium chloride combined with polyacrylamide achieved over 95% removal across six common plastic types. The treatment worked on particles ranging from 10 to 1,000 micrometers, and natural organic matter in the water actually improved performance. The findings suggest that optimizing standard water treatment processes could be a practical way to reduce microplastic contamination in drinking water sources.
Evaluating the performance of electrocoagulation system in the removal of polystyrene microplastics from water
Researchers tested electrocoagulation, a water treatment method that uses electric current to clump particles together, for removing polystyrene microplastics from water. Using aluminum electrodes at neutral pH, they achieved over 90% removal efficiency. This technology could provide a practical and effective way to remove microplastics from drinking water and wastewater, reducing human exposure to these contaminants.
Analysis of the presence of surfactante in the removal of microplastics by electrocoagulation
This study examined how the presence of surfactants in wastewater affects the removal of microplastics by electrocoagulation treatment. Understanding how co-pollutants interact is crucial for designing more effective wastewater treatment systems.
Utilizing Electrosorptionfor Efficient Removal ofPolyethylene Microplastics from Water: Critical Factors and MechanisticInsights
An electrosorption method was developed to remove polyethylene microplastics from wastewater, demonstrating improved removal efficiency compared to conventional treatment, especially for smaller particles that typically escape standard wastewater treatment plants.
Coagulative removal of microplastics from aqueous matrices: Recent progresses and future perspectives
This review examines how coagulation, a common water treatment technique, can be used to remove microplastics from water. Researchers compared the effectiveness of different coagulants, finding that natural options like chitosan and protein-based coagulants achieved removal rates above 90 percent. The study highlights the promise of natural coagulants as a more sustainable approach to tackling microplastic contamination in water treatment systems.
Coagulation properties of magnetic magnesium hydroxide for removal of microplastics in the presence of kaolin and humic acid
A magnetic magnesium hydroxide coagulant was prepared and combined with a polymer flocculant to remove polyethylene microplastics from water, achieving 87.1% removal efficiency. The magnetic component allowed easy post-treatment separation, and the presence of kaolin and humic acid in the water affected removal performance.