We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
From Waste to Roads: Improving Pavement Performance and Achieving Sustainability with Recycled Steel Slag and Low-Density Polyethylene
AI summary Read the abstract
Researchers investigated the use of recycled low-density polyethylene (LDPE) plastic and steel slag as modifiers for hot-mix asphalt to improve road performance and reduce waste. Adding 3% LDPE alongside steel slag improved pavement stability by 30-32% and extended design life by 50-60%, demonstrating that combining these waste materials significantly enhances road durability.
The use of waste, recycled, and modified materials is increasingly popular in roadway construction for sustainability and pavement longevity. This research examines the combination of steel slag (SS) and low-density polyethylene (LDPE), commonly used in plastic bags and steel manufacturing by-products, to mitigate environmental pollution. LDPE was tested as a binder modifier in two bitumen grades, 60–70 and 80–100, at concentrations of 3%, 5%, and 7% by weight. SS was used as a replacement for coarse aggregate. The physical properties of both modified and unmodified bitumen grades and SS were analyzed before creating and testing hot-mix asphalt (HMA) samples. The dynamic modulus of these samples was measured at temperatures of 4.4 °C, 21.1 °C, 37.8 °C, and 54.4 °C with frequencies of 0.1 Hz, 0.5 Hz, 1 Hz, 5 Hz, 10 Hz, and 25 Hz. Master curves were developed, and the dynamic modulus data underwent design of experiment (DOE) and computational intelligence (CI) analyses. Using KENPAVE, a mechanistic–empirical tool, the analysis assessed the design life and enhancements in damage ratio for each modifier and grade. The results showed that adding LDPE increases the softening point and penetration grade but decreases ductility due to increased bitumen stiffness, leading to premature fatigue failure at higher LDPE levels. Both 3% LDPE and 3% SS-modified LDPE improved Marshall Stability and dynamic modulus across all temperature and frequency ranges. Specifically, 3% LDPE enhanced stability by 13–16% and 3% SS-LDPE by 30–32%. The KENPAVE results for 3% LDPE showed a design life improvement of 19–25% and a damage ratio reduction of 15–18%. In comparison, 3% SS-LDPE demonstrated a design life improvement of 50–60% and a damage ratio reduction of 25–35%. Overall, this study concludes that 3% LDPE- and 3% SS-LDPE-modified HMA in both bitumen grades 60–70 and 80–100 provide optimal results for improving pavement performance.
More Papers Like This
Incorporation of plastic waste into road pavements: Performance of SMA mixtures containing flakes of low-density polyethylene
AI summary Read the abstract
Researchers tested stone mastic asphalt road mixtures incorporating waste low-density polyethylene flakes with conventional bitumen, finding the plastic-modified mixture performed comparably to standard polymer-modified mixes — with notably superior rutting resistance — supporting the feasibility of diverting low-value plastic waste into road infrastructure.
The Use of Recycled Plastic in Asphalt Pavements: Feasibility Study
AI summary Read the abstract
A feasibility study found that incorporating recycled waste plastics into asphalt via a dry-process method improved rutting and moisture-damage resistance when aggregates were pre-heated to higher temperatures. Diverting waste plastics into road construction represents a promising strategy to reduce the volume of plastic waste that would otherwise degrade into environmental microplastics.
The Use of Recycled Plastic in Asphalt Pavements: Feasibility Study
AI summary Read the abstract
Researchers used an in silico bioinformatics pipeline to identify two novel PETase enzyme candidates from thermophilic bacteria that show promising structural stability and robust hydrogen bonding for enhanced PET plastic degradation. This advances the search for enzymatic solutions to plastic pollution, potentially enabling biological breakdown of PET — a major source of microplastic fragments — under a wider range of environmental conditions.
Plastic Waste as a Modifier for Flexible Pavement Performance
AI summary Read the abstract
Researchers reviewed field and laboratory studies on plastic-modified bituminous pavements and found that incorporating HDPE and LDPE waste improves binding strength, thermal stability, water resistance, and road service life compared to conventional asphalt, offering a route to simultaneously manage plastic waste and reduce road maintenance costs.
A Comprehensive Review on the Use of Polyethylene Waste in Hot Mix Asphalt: Material Properties, Performance Enhancement, and Sustainability Perspectives
AI summary Read the abstract
This review examines the use of low-density and high-density polyethylene waste as modifiers in hot mix asphalt, finding that PE incorporation can improve binder performance and pavement durability while diverting plastic waste from landfills. The authors assess material properties, environmental benefits, and economic considerations, positioning plastic-modified asphalt as a viable circular economy approach in road construction.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.