0
Article Tier 2 Environmental Sources Marine & Wildlife Remediation Sign in to save

Impact of microplastic fibres on direct membrane filtration of low-strength primary wastewater

Journal of environmental chemical engineering 2025 4 citations

AI summary Read the abstract

This study examined how microfibres affect the performance and fouling mechanisms of track-etched membranes used for direct wastewater filtration. At 10 mg/L, microfibres did not degrade water quality but significantly accelerated cake fouling, with shorter fibres causing less fouling than longer ones.

Study Type Environmental

Wastewater treatment processes, including membrane-based separations, are considered a major barrier preventing the discharge of microplastics into aquatic environments. However, there is currently limited understanding of the effects of microfibres, a common type of microplastics, in direct membrane filtration used as an alternative secondary treatment method. This study investigated the filtration performance and fouling mechanisms during track-etched membrane filtration of low-strength primary wastewater dosed with different types of microfibres. The presence of microfibres (10 mg/L) did not affect the treated water quality (such as biodegradable organics and suspended solids), but accelerated cake fouling, as illustrated by both fouling distribution analysis and model fitting. Shorter microfibres (1 mm) led to higher membrane fouling resistance than long ones (5 and 20 mm). Polyamide (PA, 5 mm) microfibres caused a more porous cake layer but also a higher irreversible fouling resistance compared to polyethylene (PE, 5 mm) and polyethylene terephthalate (PET, 5 mm). Compared to the control (without dosing microfibres), the presence of negatively charged PET, PA, and PE microfibres allowed more deposition of soluble fulvic acid-like matter on the membrane but reduced the accumulation of soluble tyrosine-like and tryptophan-like aromatic proteins possibly due to the stronger interactions of these proteins with the microfibres. However, the organics-cations matrix did not correlate with the cake resistance, suggesting that the microfibres affected the cake structure during cake development. Overall, this study investigated for the first time the microfibres-foulants-membrane interactions in primary wastewater treatment, highlighting the impact of microfibres on the efficiency of membrane-based processes. • Microfibres did not affect the treated water quality but accelerated cake fouling. • Shorter microfibres (1 mm) led to higher membrane fouling resistance. • Polyamide microfibres caused a more porous cake layer than polyethylene and PET. • Microfibres interacted with soluble organic matter and scalant cations.

More Papers Like This

Article Tier 2

Evaluation of Membrane Fouling by Microplastic Particles in Tertiary Wastewater Treatment Processes

AI summary Read the abstract

Researchers evaluated membrane fouling caused by microplastic particles during tertiary wastewater treatment, finding that microplastics contributed to fouling through pore blocking and cake layer formation, which reduced membrane performance and treatment efficiency.

Article Tier 2

Impact of Nano- and Microplastics on Membrane Technology Performance

AI summary Read the abstract

This thesis investigated the influence of model microplastic fibers on membrane technologies used in wastewater treatment, specifically crossflow ultrafiltration and membrane bioreactor systems, finding that microplastics minimally affected performance during the initial start-up phase. The findings suggest these membrane technologies are relatively resilient to microplastic contamination in early operation.

Article Tier 2

Microplastics affect membrane biofouling and microbial communities during gravity-driven membrane filtration of primary wastewater

AI summary Read the abstract

Researchers investigated how microplastics of different sizes and concentrations affect gravity-driven membrane filtration systems used for decentralized wastewater treatment. The study found that microplastics reduced permeate flux by 9 to 54% and altered biofilm microbial communities on the membrane surface, potentially compromising treatment performance.

Article Tier 2

The impact of PET microplastic fibres on PVDF ultrafiltration performance – A short-term assessment of MP fouling in simple and complex matrices

AI summary Read the abstract

Researchers found that short PET microplastic nanofibers significantly foul polyvinylidene fluoride (PVDF) ultrafiltration membranes in wastewater treatment, with fouling effects amplified when combined with humic acid, highlighting a gap in current wastewater treatment plant removal capabilities.

Article Tier 2

Direct filtration of microfibre-containing wastewater using nanofibre membranes: combined effects of mode of filtration and type of microfibre

AI summary Read the abstract

Scientists tested how tiny plastic fibers from clothes and textiles affect water treatment systems that remove these pollutants from wastewater. They found that different types of plastic fibers either help or hurt the cleaning process depending on the material and how the water flows through filters. This research is important because it could help improve systems that remove microplastics from our water supply before they reach rivers, oceans, and potentially our drinking water.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper