0
Article Sign in to save

Functionalization of Microfiltration Media Towards Catalytic Hydrogenation of Selected Halo-Organics from Water

AI summary Read the abstract

PVDF and glass fiber microfiltration membranes were functionalized with poly(methacrylic acid) and loaded with Fe/Pd nanoparticles to achieve catalytic hydrogenation of persistent halo-organic contaminants including 4-chlorophenol and PFOA under ambient conditions. This membrane-based approach to degrading chemically resistant pollutants represents an advance in water purification technology relevant to removing co-contaminants that frequently accompany microplastic pollution in aquatic environments.

Contaminated water detoxification remains difficult due to the presence of persistent halo-organic contaminants, such as perfluorooctanoic acid (PFOA) and chlorophenols, which are chemically stable and resist conventional purification methods. Functionalized membrane-based separation and decontamination have garnered immense attention in recent years. Commercially available microfiltration membrane (PVDF) and polymeric non-woven fiber filters (glass and composite) are functionalized with poly(methacrylic acid) (PMAA) that shows outstanding pH-responsive performance and tunable water permeability under ambient conditions perfect for environmental applications. Polymer loading based on weight gain measurements on PMAA-microglass composite fibers (137%) and microglass fibers (116%) confirmed their extent of functionalization, which was significantly greater than that of PVDF (25%) due to its widely effective pore diameter. Presence of chemically active hydrogel within PVDF matrix was validated by FTIR (hydroxyl/carbonyl) stretch peak, substantial decrease in contact angle (68.8° ± 0.5° to 30.8° ± 1.9°), and decrease in pure water flux from 509 to 148 LMH/bar. Nanoparticles are generated both in solution and within PVDF using simple redox reactions. This strategy is extended to PVDF-PMAA membranes, which are loaded with Fe/Pd nanoparticles for catalytic conversion of 4-chlorophenol and PFOA, forming Fe/Pd-PVDF-PMAA systems. A total of 0.25 mg/L Fe/Pd nanoparticles synthesized in solution displayed alloy-type structures and demonstrated a strong catalytic performance, achieving complete hydrogenation of 4-chlorophenol to phenol and 67% hydrogenation of PFOA to its reduced form at 22-23 °C with ultrapure hydrogen gas supply at pH 5.7. These results underscore the potential of hybrid polymer-nanoparticle systems as a novel remediation strategy, integrating tunable separation with catalytic degradation to overcome the limitations of conventional water treatment methods.

More Papers Like This

Article Tier 2

Trace PFOA synergistically intensifies nanoplastic-humic acid fouling in forward osmosis: Mitigation using a MXene-TiO2 substrate and a TA/Fe3+ interlayer

AI summary Read the abstract

Lab tests on a water-filtering membrane found that tiny plastic particles and natural organic matter caused fouling (clogging), which got worse when a trace chemical called PFOA was also present. A redesigned membrane with new coatings reduced this clogging and allowed more water to pass through during testing.

Article

Global Occurrence, Health Risks, and Treatment Challenges of PFAS in Wastewater: Prospects for Photocatalytic Membrane Technologies

AI summary Read the abstract

Per- and polyfluoroalkyl substances (PFAS) resist conventional wastewater treatment and persist globally in aquatic environments, with monitoring and removal data highly variable across regions and methods. Photocatalytic membrane technologies show promise as a cost-credible, destructive treatment approach that improves catalyst reusability and degradation efficiency at scale.

Article Tier 2

A hybrid LMO MOF catalytic membrane with PMS activation for efficient degradation of pharmaceutical micropollutants and nanoplastics removal

AI summary Read the abstract

Researchers developed a hybrid catalytic membrane combining metal-organic frameworks with layered metal oxides for degrading pharmaceutical micropollutants and removing nanoplastics from water. The membrane achieved 95-99.5% degradation of several micropollutants and 98.5% removal of polystyrene nanoplastics. The study demonstrates a dual-function water treatment approach that addresses both chemical and plastic particle contamination simultaneously.

Article Tier 2

Magnetic confinement-enabled membrane reactor for enhanced removal of wide-spectrum contaminants in water: Proof of concept, synergistic decontamination mechanisms, and sustained treatment performance

AI summary Read the abstract

Researchers engineered a hollow-fiber membrane reactor using magnetically confined zerovalent iron nanocatalysts arranged in forest-like arrays, achieving simultaneous removal of large nanoplastics via size exclusion and up to 765-fold faster degradation of organic contaminants (bisphenol A) and phosphate compared to conventional systems.

Article

Removal of Poly- and Perfluoroalkyl Substances from Natural and Wastewater by Tailored Silica-Based Adsorbents

AI summary Read the abstract

Researchers developed mesoporous silica (SBA-15) grafted with alkyl amino groups to remove PFOA — a persistent PFAS chemical — from water, achieving adsorption capacity of up to 649 mg/g through electrostatic interactions between protonated surface amino groups and the contaminant, suggesting a promising approach for PFAS remediation.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper