We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Innovative Approach to Produce Raw, Torrefied Almond Shells and Plastic Waste Blend Pellets
Summary
Blend pellets combining torrefied almond shells (30%) with post-consumer HDPE plastic waste (70%) and starch binder achieve bulk densities of 360–410 kg/m³ and durabilities of 80–88%, offering a viable pathway to valorize agricultural residues and plastic waste together. Diverting mixed post-consumer plastic waste into solid fuel or biocomposite applications reduces the volume available for environmental fragmentation into microplastics.
The increasing demand for sustainable materials has driven interest in biocomposites that incorporate low-value agricultural residues to offset the use of virgin plastics. The study investigated the production of blend pellets from raw and torrefied almond shells and post-consumer plastic waste as a potential feedstock for biocomposite and biofuels applications. Almond shells were torrefied in a lab-scale fixed-bed reactor at 300 °C for 30 min prior to the pelleting tests. High-density polyethylene (HDPE) and polypropylene (PP) wastes were size-reduced in a Crumbler (rotary shear grinder) fitted with a 2 mm head and a 2 mm screen to remove the fines. A portion of the crumbled HDPE, and torrefied almond shells were further ground in a Wiley mill fitted with 2 and 1 mm screens for flat die pelleting tests. The flat die pellet mill used for testing had a 6 mm die and a length-to-diameter (L/D) ratio of 2.0. The blend ratio consisted of 30% torrefied almond shells and 70% HDPE, with a 10% starch binder. The measured pellet properties include unit, bulk and tap densities, durability, and expansion ratio. The bulk density of the blend pellets ranged from 360 to 410 kg/m3, and durability ranged from 80% to 88%. The blend pellet unit density ranged from 830 to 880 kg/m3. The blend pellets produced using crumbled HDPE, PP and raw and torrefied almond shells in a ring die pilot-scale pellet mill with an L/D ratio of 6 and steam conditioning exhibit similar densities to those of HDPE pellets produced using a flat die pellet mill, albeit with lower durability. The study indicated that a smaller grind size and preheating the blend before pelleting produce blend pellets with higher density and greater durability.