We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastic removal efficiency in a megacity water treatment plant and dynamics in the distribution system
AI summary Read the abstract
This study tracked microplastics through a megacity drinking water treatment plant and urban distribution network, finding significant MP removal through treatment but detecting residual contamination in distributed water, raising public health concerns in rapidly growing urban areas.
Microplastic (MP) contamination in drinking water has emerged as a pressing environmental and public health concern. However, its behavior across treatment and urban distribution systems remains poorly understood, particularly in rapidly growing megacities. This study investigates MPs' prevalence, removal efficiency in a major water treatment plant (WTP) in Bangkok, Thailand, and through the urban water distribution network. Seasonal samples were collected at four treatment stages, clarification, filtration, and chlorination, in a conventional WTP, and at five household taps located 3–11 km downstream in the distribution system. MP concentrations in raw water reached 114 ± 46 items/L in the dry season and 56 ± 11 items/L in the rainy season. The WTP achieved an overall MP removal efficiency of 75–81 %, with filtration being the most effective stage. However, residual MPs persisted in treated water, with concentrations ranging from 14 ± 8 items/L during the rainy season to 22 ± 18 items/L in the dry season. Notably, MP levels increased significantly with distance from the WTP, peaking at 66 ± 27 items/L at the farthest household, suggesting secondary contamination within the distribution system. Fragments were the most abundant MP morphology, while PP, PE, and PET were the dominant polymer types. Small-sized MPs (<100 µm) were prevalent, raising concerns about human exposure and treatment limitations. This study highlights the need for integrated water quality management addressing both treatment efficiency and distribution infrastructure. The findings serve as a reference for improving water safety in Bangkok and other rapidly urbanizing cities worldwide. • First study on the treatment and distribution of MPs in Bangkok tap water. • Raw water had up to 114 ± 46 MPs/L; treated water had 14–22 ± 18 MPs/L. • Small MPs (<100 µm) dominated, revealing the limits of conventional MP treatment. • MP levels rose with distance from WTP, reaching 66 ± 27 MPs/L in tap water. • Aging pipes release MPs via wear, biofilm detachment, and pressure surges.
More Papers Like This
Microplastics in drinking water. Efficiency of treatment and distribution of a drinking water cycle
AI summary Read the abstract
Researchers tracked microplastics through an entire drinking water cycle — from reservoir to treatment plant to distribution network — and found that conventional treatment removed about 92% of microplastics, but particle counts rose again in storage tanks and pipes, likely from material wear. The study highlights that even effective treatment plants can be undermined by the distribution infrastructure downstream.
Microplastic removal across ten drinking water treatment facilities and distribution systems
AI summary Read the abstract
Researchers characterized microplastic removal across ten drinking water treatment facilities and found that conventional municipal treatment achieved greater than 97.5% removal, primarily through granular media filtration or ultrafiltration. Untreated source waters contained between approximately 1,200 and 7,200 microplastic particles per liter, with polypropylene, polyethylene, and polyamide being the most common types. The findings provide valuable data on microplastic exposure through drinking water and the effectiveness of existing treatment processes.
Microplastics in urban water cycles: Looking for a more scientific approach for sampling and characterization in wastewater and drinking water treatment plants
AI summary Read the abstract
Researchers monitored microplastics in urban water cycles across three drinking water plants and two wastewater treatment plants using a self-designed large-volume sampler that collected up to 1,000 liters per sample. Raw drinking water and wastewater contained 2 or more microplastic particles per liter, highlighting contamination across the urban water system.
Detection and Occurrence of Microplastics through Municipal and Pilot-scale Drinking Water Treatment Plants
AI summary Read the abstract
Researchers developed a new method for detecting and characterizing microplastics in drinking water samples from municipal and private treatment systems. They found microplastics in treated drinking water, though at lower concentrations than in source water, and identified fibers as the most common type. The study demonstrates that conventional water treatment does not completely remove microplastics from drinking water.
Tracking microplastics in a drinking water supply system proximity to industrial facilities: Occurrence, source identification, and risk assessment
AI summary Read the abstract
Researchers comprehensively investigated microplastic occurrence, sources, and health risks in a drinking water supply system near industrial facilities, finding that a granular activated carbon filter removed 93.39% of microplastics at the treatment plant. However, microplastic abundance increased during distribution, highlighting post-treatment contamination as a critical but underappreciated exposure pathway.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.