0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Remediation Sign in to save

Transport and fate of microplastic particles in wastewater treatment plants

Water Research 2016 1704 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 50 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Steve Carr, Liu Jin, Arnold G. Tesoro

Summary

Researchers tracked microplastic particles through multiple stages of a wastewater treatment plant, finding that particles were concentrated in sludge but that a fraction passed through each treatment stage and remained in the final effluent.

Polymers
Study Type Environmental

Municipal wastewater treatment plants (WWTPs) are frequently suspected as significant point sources or conduits of microplastics to the environment. To directly investigate these suspicions, effluent discharges from seven tertiary plants and one secondary plant in Southern California were studied. The study also looked at influent loads, particle size/type, conveyance, and removal at these wastewater treatment facilities. Over 0.189 million liters of effluent at each of the seven tertiary plants were filtered using an assembled stack of sieves with mesh sizes between 400 and 45 μm. Additionally, the surface of 28.4 million liters of final effluent at three tertiary plants was skimmed using a 125 μm filtering assembly. The results suggest that tertiary effluent is not a significant source of microplastics and that these plastic pollutants are effectively removed during the skimming and settling treatment processes. However, at a downstream secondary plant, an average of one micro-particle in every 1.14 thousand liters of final effluent was counted. The majority of microplastics identified in this study had a profile (color, shape, and size) similar to the blue polyethylene particles present in toothpaste formulations. Existing treatment processes were determined to be very effective for removal of microplastic contaminants entering typical municipal WWTPs.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Improved methodology to determine the fate and transport of microplastics in a secondary wastewater treatment plant

An improved methodology was applied to track the fate and transport of microplastics through a wastewater treatment plant, measuring particle size, shape, and polymer type at multiple treatment stages. The study found that while most microplastics are removed during primary and secondary treatment, smaller particles persist into the effluent and sludge.

Article Tier 2

Tracing the fate of microplastic in wastewater treatment plant: A multi-stage analysis of treatment units and sludge

Researchers tracked microplastics through every stage of a wastewater treatment plant and found that while treatment removes many particles from the water, most end up concentrated in the leftover sludge. Fibers and fragments were the most common shapes, made primarily of polyester and polyethylene. Since treated sludge is often spread on farmland, this creates a pathway for microplastics to enter soil and potentially the food chain.

Article Tier 2

Transport and accumulation of microplastics through wastewater treatment sludge processes

Researchers tracked microplastic concentrations through each stage of wastewater treatment sludge processing — including thickening, anaerobic digestion, and dewatering — finding that each step altered MP abundance and size distribution, with digestion fragmenting some particles into smaller pieces rather than eliminating them.

Article Tier 2

Influence of wastewater treatment process on pollution characteristics and fate of microplastics

Researchers investigated microplastic abundance and removal efficiency across four wastewater treatment plants using different treatment technologies, finding influent concentrations between 539 and 1,290 particles per liter that were reduced substantially by primary and secondary treatment. Smaller microplastic particles proved hardest to remove and most likely to persist in final effluent.

Article Tier 2

Fate of microplastics in wastewater treatment plants and their environmental dispersion with effluent and sludge

Researchers tracked microplastics through a wastewater treatment plant and found 12 different polymer types in effluents and sludge, with smaller particles (25–104 μm) most abundant and fibres displaying lower sizes than fragments. The study demonstrates that WWTPs do not fully remove microplastics and that processed sludge marketed as soil amendment carries plastic contamination.

Share this paper