We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
On the Identification of Rayon/Viscose as a Major Fraction of Microplastics in the Marine Environment: Discrimination between Natural and Manmade Cellulosic Fibers Using Fourier Transform Infrared Spectroscopy
AI summary Read the abstract
Researchers examined whether FT-IR spectroscopy can reliably distinguish man-made cellulosic fibers such as rayon and viscose from natural fibers in marine microplastic samples, finding that transmission spectra paired with ATR libraries failed to differentiate the two, while ATR microscopy and chemometric methods such as principal component analysis enabled successful discrimination.
This work was sparked by the reported identification of man-made cellulosic fibers (rayon/viscose) in the marine environment as a major fraction of plastic litter by Fourier transform infrared (FT-IR) transmission spectroscopy and library search. To assess the plausibility of such findings, both natural and man-made fibers were examined using FT-IR spectroscopy. Spectra acquired by transmission microscopy, attenuated total reflection (ATR) microscopy, and ATR spectroscopy were compared. Library search was employed and results show significant differences in the identification rate depending on the acquisition method of the spectra. Careful selection of search parameters and the choice of spectra acquisition method were found to be essential for optimization of the library search results. When using transmission spectra of fibers and ATR libraries it was not possible to differentiate between man-made and natural fibers. Successful differentiation of natural and man-made cellulosic fibers has been achieved for FT-IR spectra acquired by ATR microscopy and ATR spectroscopy, and application of ATR libraries. As an alternative, chemometric methods such as unsupervised hierarchical cluster analysis, principal component analysis, and partial least squares-discriminant analysis were employed to facilitate identification based on intrinsic relationships of sample spectra and successful discrimination of the fiber type could be achieved. Differences in the ATR spectra depending on the internal reflection element (Ge versus diamond) were observed as expected; however, these did not impair correct classification by chemometric analysis. Moreover, the effects of different levels of humidity on the IR spectra of natural and man-made fibers were investigated, too. It has been found that drying and re-humidification leads to intensity changes of absorption bands of the carbohydrate backbone, but does not impair the identification of the fiber type by library search or cluster analysis.
More Papers Like This
A practical approach based on FT-IR spectroscopy for identification of semi-synthetic and natural celluloses in microplastic investigation
AI summary Read the abstract
Researchers developed a practical FT-IR spectroscopy protocol to distinguish semi-synthetic celluloses such as rayon from natural celluloses in microplastic investigations, addressing a longstanding misidentification problem by characterizing spectral differences among eight semi-synthetic and four natural cellulose materials.
Analysis of Microplastics in Synthetic Fibers Through FT-IR Microscope
AI summary Read the abstract
This study used FTIR microscopy to identify and characterize microplastics derived from synthetic textile fibers in environmental samples. Synthetic fiber microplastics are among the most common types found in the ocean, and FTIR analysis is essential for confirming their identity and polymer composition.
Fourier-Transform Infrared Spectroscopy of Environmentally Weathered Textile Fabrics for Enhanced Microplastic Identification
AI summary Read the abstract
This study used infrared spectroscopy to identify microplastic fibers from clothing that had been weathered by ocean conditions, finding that environmental aging makes spectral identification more difficult. Accurate detection of these aged fibers is essential for understanding the true scale of textile microplastic pollution in the ocean.
FT-IR analysis for monitoring marine microplastics
AI summary Read the abstract
This paper reviews Fourier-transform infrared (FT-IR) spectroscopy as an analytical tool for identifying and characterizing marine microplastics, which are difficult to monitor due to their small size and the complexity of environmental samples. Robust analytical methods are essential for assessing microplastic contamination and its potential entry into marine food webs.
When microplastics are not plastic: Chemical characterization of environmental microfibers using stimulated Raman microspectroscopy
AI summary Read the abstract
Researchers used advanced Raman microscopy to determine whether microfibers found in various marine environments are actually made of plastic. They found that roughly three-quarters of environmental microfibers are natural materials like cotton or cellulose rather than synthetic polymers. The study suggests that many previous estimates of microplastic fiber pollution may have significantly overcounted by misidentifying natural fibers as plastic.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.