We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A flow-based platform hyphenated to on-line liquid chromatography for automatic leaching tests of chemical additives from microplastics into seawater
AI summary Read the abstract
An automated flow-based system was developed to measure how chemical additives (phthalates and bisphenol A) leach out of microplastics into seawater. This tool allows more accurate, real-time measurement of the chemical hazards that microplastics release into marine environments.
An automatic flow-based system as a front end to liquid chromatography (LC) for on-line dynamic leaching of microplastic materials (polyethylene of medium density and poly(vinyl chloride)) with incurred phthalates and bisphenol A is herein presented. The microplastic particles were packed in a metal column holder, through which seawater was pumped continuously by resorting to advanced flow methodology. Each milliliter of the leachable (bioaccessible) fraction of chemical additives was preconcentrated on-line using a 10 mm-long octadecyl monolithic silica column placed in the sampling loop of the injection valve of a HPLC system that served concomitantly for analyte uptake and removal of the seawater matrix. After loading of the leachate fraction, the LC valve was switched to the inject position and the analytes were eluted and separated by a monolithic column (Onyx C18HD 100 × 4.6 mm) using an optimized acetonitrile/water gradient with UV detection at 240 nm. The automatic flow method including dynamic flow-through extraction, on-line sorptive preconcentration, and matrix clean-up was synchronized with the HPLC separation, which lasted ca. 9 min. The only two currently available multi-component certified reference materials (CRM) of microplastics (CRM-PE002 and CRM-PVC001) were used for method development and validation. Out of the eight regulated phthalates contained in the two CRMs, only the 2 most polar species, namely, dimethyl phthalate and diethyl phthalate as well as bisphenol A, were leached significantly by the seawater in less than 2 h, with bioaccessibility percentages of 51-100%. The leaching profiles were monitored and modeled with a first-order kinetic equation so as to determine the rate constants for desorption in a risk assessment scenario. Intermediate precision values of bioaccessibility data for three batches of CRMs were for the suite of targeted compounds ≤22%. This work for the first time reports a fully automatic flow method with infinite sink capacity (i.e., using a surplus of extracting solution) for the target species able to mimic the leaching of additives from plastic debris across the water body in marine settings under worst-case extraction conditions.
More Papers Like This
Development of a dispersive liquid–liquid microextraction method for the determination of plastic additives in seawater
AI summary Read the abstract
Researchers developed a sensitive liquid-liquid microextraction method to detect seven plastic additive chemicals — including phthalates, triclosan, and antioxidants — in seawater, achieving good recovery and detection limits in the parts-per-billion range. These additives leach from microplastics into surrounding water and carry their own toxicity, meaning the chemical contamination from plastic pollution extends well beyond the physical particles themselves.
Plastic additives and microplastics as emerging contaminants: Mechanisms and analytical assessment
AI summary Read the abstract
Researchers reviewed how chemical additives mixed into plastics during manufacturing — including stabilizers, flame retardants, and plasticizers — can leach out throughout a plastic's lifecycle and pose risks to ecosystems and human health, with microplastics acting as carriers that concentrate and transport these hazardous chemicals.
An automatic flow-through system for exploration of the human bioaccessibility of endocrine disrupting compounds from microplastics
AI summary Read the abstract
An automated flow-through system was developed to investigate the bioaccessibility of plastic-borne contaminants in the human gastrointestinal tract using physiologically relevant body fluids. The system measured leaching rates of plastic additives under fasted and fed state conditions, providing the first mechanistic data on how ingested microplastics release chemical contaminants in the human gut.
Multiresidue method for the determination of high production volume plastic additives in river waters
AI summary Read the abstract
Researchers developed a liquid chromatography-mass spectrometry method to detect 21 plastic additives — including phthalates, bisphenol A, and alkylphenols — in river water. Many of these are endocrine-disrupting chemicals, and the method enables monitoring of contaminants leaching from plastics into freshwater.
DyLeMMA: A dynamic leaching method to assess the fate of plastic additives in microplastic pollution
AI summary Read the abstract
Researchers developed a new dynamic leaching method called DyLeMMA to more realistically assess how quickly chemical additives leach from microplastics under conditions that better simulate natural environments. Previous static methods were found to overestimate leaching rates by not accounting for how rapidly concentrations change over time in the real world. More realistic leaching data are important for accurately assessing the chemical risk that microplastics pose to aquatic organisms.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.