We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Iced block method: An efficient method for preparation of micro-sized expanded polystyrene foams
Summary
Researchers developed a new method for producing micro-sized expanded polystyrene (EPS) foam particles in the lab, enabling better-controlled experiments on EPS microplastic toxicity and environmental behavior. EPS foam is widely found in the environment but has been understudied compared to other microplastic types.
Recently, numerous studies concerning dye-labeled microplastic beads have reported on the end-of-life, environmental effects of microplastics because of their ubiquitous commercial usage. Less is understood about the toxicity and bioaccumulation of plastics other than microplastic beads, which can also harm the environment (e.g., fragments, fibers, foams, and films). Expanded polystyrene (EPS) is widespread in the environment owing to its many uses, however, limited research has been conducted on EPS foams. This study focuses on developing an efficient method for the preparation of micro-sized EPS foams for research purposes and compares it with previous microplastics preparation methods reported in 68 previous studies. It was demonstrated that the iced EPS block method (iced EPS block + water) generated larger quantities of smaller-sized EPS foams (20-200 and 200-500 μm) compared to the EPS + ice + water and EPS + water methods. The optimal protocol includes 1) iced EPS block preparation, 2) grinding and sieving, and 3) collecting. Additionally, it was confirmed that the iced EPS block method requires less money, labor, and time compared to previously reported methods in the literature. The method proposed in this research can assist future investigations into the environmental effects of EPS foams.
Sign in to start a discussion.
More Papers Like This
Preparation of polystyrene microplastic particles by solvent-dissolution-precipitation
Researchers developed a controlled laboratory method to produce polystyrene microplastic particles in specific sizes ranging from 0.35 to 52 microns by dissolving and re-precipitating polystyrene in solvents, creating reference materials that closely mimic environmental microplastics. These standardized particles are essential for calibrating detection methods and conducting reliable toxicology research on microplastic health effects.
An assessment of methods used for the generation and characterization of cryomilled polystyrene micro- and nanoplastic particles
Researchers evaluated cryomilling as a method for generating environmentally realistic microplastic and nanoplastic particles from polystyrene for use in laboratory studies. They found that increasing the number of milling cycles consistently produced smaller particles without altering the polymer's chemical composition. The study provides optimized protocols for creating heterogeneous test particles that more closely resemble the microplastics found in real environmental samples.
Engineered Polystyrene-Based Microplastics of High Environmental Relevance
Researchers developed a method for creating laboratory microplastic particles that more closely resemble the weathered, environmentally relevant microplastics found in nature. They demonstrated that standard pristine microplastic beads used in most toxicity studies have very different surface properties than real-world particles, which may lead to inaccurate risk assessments. The study provides the research community with more realistic test materials for studying the true environmental and health impacts of microplastic pollution.
Particle Size and Pre-Treatment Effects on Polystyrene Microplastic Settlement in Water: Implications for Environmental Behavior and Ecotoxicological Tests
How polystyrene microplastics are prepared for lab tests — including shaking or ultrasonic treatment — significantly affects particle size distributions and thus experimental outcomes. Standardizing sample preparation is critical for producing reproducible and comparable microplastic research results.
Expanded beads of polyethylene moldable at low steam pressure
Researchers developed an expanded polyethylene bead foam that can be molded at very low steam pressures, making it cheaper and more flexible to manufacture than conventional expanded polystyrene (Styrofoam). Unlike polystyrene, polyethylene foam is more readily recyclable and the study explicitly notes this approach avoids contributing to microplastic pollution. This represents a step toward replacing one of the most environmentally persistent foam plastics with a more manageable alternative.