We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A Critical Review of SCWG in the Context of Available Gasification Technologies for Plastic Waste
Summary
This review critically assessed supercritical water gasification (SCWG) in the context of available plastic waste gasification technologies, evaluating thermochemical conversion efficiency, product gas composition, and scalability challenges compared to conventional pyrolysis and gasification methods for non-recyclable plastic end-of-life management.
End of life packaging is nowadays one of the major environmental problems due to its short usage time, the low biodegradability, and the big volume occupied. In this context, gasification is one of the most promising chemical recycling techniques. Some non-recyclable or non-compostable waste gasification plants are already operating such as Enerkem Alberta Biofuels in Canada or the Sierra’s FastOx Pathfinder in California. In this review, we have examined works about plastic gasification from the last fifteen years with a specific focus on polyolefin (PP, PE), plastics mix, and co-gasification of plastic with biomass. For each of these, the best operating conditions were investigated. A very in-depth section was dedicated to supercritical water gasification (SCWG). The most used reactors in gasification processes are fluidized bed reactors together with air or steam as gasifying agents. Tar removal is commonly performed using olivine, dolomite, or nickel based catalysts. SCWG has numerous advantages including the inhibition of tar and coke formation and can be used to remove microplastics from the marine environment. In co-gasification of plastic material with coal or biomass, synergistic effects are observed between the raw materials, which improve the performance of the process, allowing to obtain higher gas yields and a syngas with a high energy content.