We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Preparation of a reference material for microplastics in water—evaluation of homogeneity
Summary
Researchers developed a candidate reference material for microplastics in water and evaluated its homogeneity, finding it suitable for use in laboratory intercomparison studies and as a tool for validating microplastic analytical methods.
Validation of analytical methods for measurements of microplastics (MP) is severely hampered because of a general lack of reference materials, RM. There is a great need to develop such reference materials. This study presents a concept of three-component kit with immobilised MP in solid NaCl, a surfactant and clean water that can be applied for the production of many types of MP RMs. As proof of concept, an RM for polyethylene terephthalate (PET) particles in water was prepared and evaluated for its homogeneity. The particles ranged from 30 μm (Feretmin) to about 200 μm adapted by wet sieving. A specific number of PET particles were immobilized in about 0.29 g of solid NaCl by freeze-drying 1 mL of a NaCl suspension. By using manual and automated counting, twenty reconstituted 1-L water samples were evaluated for homogeneity with respect to number of PET particles from 30 μm to > 200 μm/L of water. The number of particles was 730 ± 120 (mean ± one standard deviation (SD); n = 10) and 865 ± 155 particles (n = 10) obtained by optical microscopy in two independent laboratories. This corresponded to relative SDs of 16.4 and 17.9% and a mean of 797 ± 151 particles (18.9% RSD, for n = 20). Homogeneity studies of the NaCl carrier without reconstitution resulted in 794 ± 60 particles (7.5% RSD). The homogeneity of PET in the salt carrier was also evaluated directly with respect to mass of PET per vial using an ultra-micro balance. An average mass of 293 ± 41 μg of PET was obtained (14, % RSD for n = 14). Micrographs were recorded to demonstrate the absence of major sources of contamination of the RM components. Information about the particle size distribution and particle shapes was obtained by laser diffraction (LD) and dynamic image analysis (DIA). In addition, the identity of the PET polymer was confirmed by Raman and FT-IR spectroscopy. The RM was developed for a large-scale inter-laboratory comparison of PET particles in water (ILC). Based on the homogeneity results, the material was found to be sufficiently homogeneous to be of meaningful use in the ILC. In a 3-day process, more than 500 samples of PET particles in the NaCl carrier were prepared with good potential for further upscaling with respect to the number of vials or with other kinds of polymers. The stability of PET was not evaluated but it was deemed to be stable for the duration of the ILC.
Sign in to start a discussion.
More Papers Like This
Innovative reference materials for method validation in microplastic analysis including interlaboratory comparison exercises
Researchers developed innovative reference materials for validating microplastic analysis methods, presenting interlaboratory comparison results that support quality assurance and standardization in the growing field of microplastic detection.
Reference materials for microplastics in environmental matrices
This paper discussed the development and use of reference materials for microplastic analysis in environmental matrices, addressing the urgent need for calibration standards to ensure comparable and reliable measurements across different laboratories. Standardized reference materials are a foundational requirement for credible, policy-relevant microplastic monitoring.
The use of reference material in microplastic research: general aspects
This paper discussed general considerations for using certified reference materials in microplastic research, arguing that standardized reference materials are essential for ensuring that measurements are reproducible and comparable across different laboratories and studies. The lack of such standards remains a major limitation in the field.
A novel proof of concept approach towards generating reference microplastic particles
This paper presented a proof-of-concept approach for generating standardized reference microplastic particles to improve comparability across analytical methods. The lack of consistent reference materials has been a key barrier to producing reliable and comparable microplastic research data.
Assessment of microplastic content in natural waters and sediments: sampling and sample preparation
Researchers reviewed and evaluated sampling and analytical methods for measuring microplastic content in natural waters and sediments, assessing sources of error and variability in current approaches. The review recommended a standardized protocol to improve cross-study comparability.