We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhanced adsorption of polystyrene nanoplastics (PSNPs) onto oxidized corncob biochar with high pyrolysis temperature
AI summary Read the abstract
Researchers tested how pyrolysis temperature and oxidative aging affect corncob biochar's ability to adsorb polystyrene nanoplastics, finding that higher pyrolysis temperatures and oxidation both increased adsorption capacity through expanded surface area, with hydrophobic interactions dominating in fresh biochar and hydrogen bonding becoming more important after oxidation.
Plastic pollution has become a global threat in the natural environment, and an urgent remedial measure is needed to reduce the negative effects caused by plastic pollutants. In the current study, the effects of pyrolysis temperature (500 °C, 700 °C, and 900 °C) and aging on the adsorption of polystyrene nanoplastics (PSNPs) onto corncob biochar were systematically assessed with kinetic, isotherm, pH-dependent adsorption experiments, FTIR and XPS spectroscopy, and DLVO calculations. The oxidation was done with 5% of HNO/HSO to simulate long-term oxidative aging of biochar in the environment. The results showed that the specific surface area, hydrophobicity, and aromaticity of biochar increased with pyrolysis temperature, whereas the specific surface area and amounts of oxygen-containing groups increased after oxidation. The adsorption mechanism of PSNPs onto the biochar was explored based on the correlation between biochar properties and adsorption parameters derived from adsorption isotherms. Overall, the adsorption capacity of biochar for PSNPs increased with increased pyrolysis temperature and after aging. While the increase of specific surface area was considered the major factor leading to the increase of the adsorption, the variation in surface properties also played an important role. Pore filling, hydrophobic interaction, and hydrogen bonding may all be involved in PSNPs adsorption to biochar. However, the hydrophobic interaction might be more important for the fresh biochar, whereas hydrogen bonding involving oxygen-containing groups might make a bigger contribution to PSNPs adsorption to oxidized biochar. The pH experiments revealed that PSNPs adsorption decreased in general with the increase of pH, indicating that electrostatic repulsion played a vital role in the PSNPs adsorption process. The results of this study indicate that biochar can be potentially applied to immobilize plastic particles in terrestrial ecosystems such as in soil or groundwater, and the immobilization could be enhanced via artificial oxidation or aging of biochar in the natural environment.
More Papers Like This
Insights into the removal of polystyrene nanoplastics using the contaminated corncob-derived mesoporous biochar from mining area
AI summary Read the abstract
Researchers developed a mesoporous biochar from contaminated corncobs collected in mining areas that effectively adsorbs polystyrene nanoplastics from water, achieving high removal capacity through electrostatic and hydrophobic interactions.
Enhanced polystyrene nanoplastic removal by CTAB-modified magnetic biochar: Adsorption performance and mechanisms
AI summary Read the abstract
Researchers engineered a CTAB-modified magnetic biochar adsorbent that removes polystyrene nanoplastics with a maximum capacity of 234 mg/g — more than double unmodified biochar — through electrostatic attraction, hydrophobic interactions, and iron oxide surface complexation, while also being easily retrievable with a magnet.
Effects of activation time and temperature on the performance of uniform-sized biochar for microplastic adsorption from wastewater
AI summary Read the abstract
Researchers optimized CO₂ activation of pine-derived biochar for polystyrene microplastic removal, finding that increasing activation temperature to 850°C expanded surface area from 236 to 600 m²/g and drove removal efficiency to 99%, establishing activation temperature as the dominant tuning parameter for microplastic remediation performance.
Biochar-facilitated remediation of nanoplastic contaminated water: Effect of pyrolysis temperature induced surface modifications
AI summary Read the abstract
Researchers synthesized sugarcane bagasse biochar at three pyrolysis temperatures and found that biochar produced at 750°C removed over 99% of nanoplastics from water within 5 minutes, with monolayer sorption kinetics and a capacity of 44.9 mg/g, offering a rapid and efficient agricultural-waste-derived remediation approach.
Corncob-derived biochar as a cleaner technology for microplastic removal and energy recovery in a continuous-flow filtration system
AI summary Read the abstract
Researchers packed fixed-bed columns with corncob-derived biochar and passed polystyrene microplastic suspensions through them, achieving up to 97.85% removal efficiency at pH 9 via physical entrapment and hydrophobic interactions, while also demonstrating that spent biochar has increased energy value (31.82 MJ/kg) suitable for recovery.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.