We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Characterisation of microplastics and unicellular algae in seawater by targeting carbon via single particle and single cell ICP-MS
Summary
Researchers used single particle and single cell ICP-MS to characterize microplastics and microalgae simultaneously in seawater by targeting carbon signals, demonstrating the technique as a rapid and sensitive tool for distinguishing plastic particles from biological material.
The discharge of plastic waste and subsequent formation and global distribution of microplastics (MPs) has caused great concern and highlighted the need for dedicated methods to characterise MPs in complex environmental matrices like seawater. Single particle inductively coupled plasma - mass spectrometry (SP ICP-MS) is an elegant method for the rapid analysis of nano- and microparticles and to characterise number concentrations, mass, and size distributions. However, the analysis of carbon (C)-based microstructures such as MPs by SP ICP-MS is at an early stage. This paper investigates various strategies to improve figures of merit to detect and characterise MPs in complex matrices, such as seawater. Ten methods operating distinct acquisition modes with various collision/reaction gases, tandem MS (ICP-MS/MS) and targeting C or C were developed and compared for the analysis of polystyrene-based MPs standards in ultra-pure water and seawater. The robust analysis of MPs in seawater was accomplished by on-line aerosol dilution enabling repeatable size calibration while minimising drift effects. However, the direct analysis of seawater decreased ion transmission and required matrix-matching for accurate size calibration. Analysis of the C isotope instead of C improved the size detection limits (sDL) to 0.62 μm in ultra-pure water and to 0.96 μm in seawater. ICP-MS/MS methods decreased ion transmission but also reduced background signal and increased selectivity, particularly in the presence of spectral interferences. In the second part of this study, it was demonstrated that the developed methods were applicable for the analysis of C in unicellular organisms and allowed calibration of physical dimensions. This is relevant for the investigation and understanding of phenotypical traits associated, for example, with climate change resilience as well as oceanic C storage. SP/SC ICP-MS was employed to target five different intact Symbiodiniaceae algae strains with diverse life-histories in seawater and polystyrene-based MPs were used to calibrate cellular C masses, which were between 51 and 83 pg. The C mass distribution across the analysed unicellular cells was used for modelling cell sizes, which were in the range of 7.6 and 10.1 μm. Determined values were in line with values obtained with complementary techniques (Coulter-counting, total organic C analysis and microscopic analysis).
Sign in to start a discussion.
More Papers Like This
Direct Measurement of Microplastics by Carbon Detection via Single Particle ICP-TOFMS in Complex Aqueous Suspensions
Researchers developed a single particle ICP-TOFMS method for directly measuring microplastics in complex aqueous suspensions by detecting carbon, successfully differentiating microplastic carbon from natural particles and dissolved organic carbon in environmental samples.
Determination of carbon in microplastics and single cells by total consumption microdroplet ICP-TOFMS
This study developed a total consumption microdroplet ICP-TOFMS method to determine carbon content in microplastics and single cells, overcoming size limitations of conventional nebulization methods. The approach enables more accurate elemental characterization of individual microplastic particles.
Quantification of palladium-labelled nanoplastics algal uptake by single cell and single particle inductively coupled plasma mass spectrometry
Researchers developed a method using palladium-labelled nanoplastics and single-cell mass spectrometry to quantify nanoplastic uptake by algal cells. The study demonstrated that this technique can measure nanoplastic exposure on a per-cell basis, providing a valuable new tool for understanding how nanoplastics interact with organisms at the base of aquatic food webs.
Single particle ICP-TOFMS for the detection of micro-scale polystyrene and polyvinyl chloride from artificially aged bulk plastic
Researchers developed a new analytical method using single-particle mass spectrometry (SP ICP-TOFMS) to simultaneously detect polystyrene and PVC microplastics based on their carbon and chlorine content. The method was tested on artificially aged plastic samples, demonstrating it can distinguish between different polymer types at the individual particle level. Improving detection methods like this is essential for accurately tracking microplastics in complex environmental samples where multiple polymer types coexist.
CO2-based matrix-independent carbon quantification approach for single microplastic-ICP-MS analysis
Researchers developed a CO2-based matrix-independent calibration approach for single particle ICP-MS analysis, enabling accurate size determination of microplastics between 2–7 μm without needing particle-type-specific standards.