We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
The Py – GC-TOF-MS analysis and characterization of microplastics (MPs) in a wastewater treatment plant in Gauteng Province, South Africa
AI summary Read the abstract
Researchers used Py-GC-TOF-MS to characterize microplastics at a South African wastewater treatment plant and found that polypropylene, polyethylene, and polystyrene were the dominant polymer types, with smaller particles below 100 µm passing through treatment processes into receiving water bodies.
Wastewater treatment plants (WWTPs) in South Africa, like is the case for most WWTPs around the globe albeit capable of removing substantial quantities of microplastics (MPs) and in fact, the treatments become ineffective for those plastic particles less than 100 µm. As a consequence, the receiving water bodies in which the final effluent is discharged becomes highly polluted. The present research is devoted to the analysis of the pervasive MPs in wastewaters of the treatment plant located in the Gauteng Province, South Africa using Pyrolysis - GC-TOF-MS. Based on the results, there were 23 pyrolyzate products with contributions from PVC, PA, PET and PE with abundances of 47.8%, 13.1%, 17.4% and 4.3% respectively. The remaining 17.4% could be attributed as additives in MPs. The SEM images illustrated that the MPs appeared to be inter - wined, fibrous of different thicknesses and lengths. The highly weathered MPs exhibited the rough surface which was noticeably damaged with peeled off layers presumably because of photo-oxidation during the aging process. The vibrational modes of FTIR revealed the presence of the various functional groups in the corresponding polymers of MPs. The thermal studies confirmed the presence of calcium, aluminum and silicon as residues of catalysts or flame retardants or UV stabilizers in MPs or as adsorbates resulting from the surface adsorption from the surroundings. The Py-GC-TOF-MS confirmed the identity of the various fragments related to the MPs monomers.
More Papers Like This
Evaluating the effects and removal efficiency of microplastics at Daasport wastewater treatment plant: the case of Gauteng province, South Africa
AI summary Read the abstract
Researchers assessed microplastic removal at a South African wastewater treatment plant, detecting fibers, fragments, and films composed of PA, PE, PP, and PET polymers ranging from 198 to 3400 μm, and found the facility eliminated roughly 80% of incoming particles yet still released measurable concentrations into the receiving environment.
Identification and quantification of microplastics in wastewater treatment plants by spectroscopic and microscopic techniques in Johannesburg East, South Africa
AI summary Read the abstract
Researchers at two Johannesburg wastewater treatment works found extremely high concentrations of microplastics — over 3,000 particles per liter of influent — with the treatment processes removing most but not all particles before discharge. The study fills a data gap for South Africa and confirms that wastewater plants in the region are both a sink and a residual source of microplastic pollution into receiving water bodies.
Qualitative characterisation and identification of microplastics in a freshwater dam at Gauteng Province, South Africa, using pyrolysis–gas chromatography–time of flight–mass spectrometry (Py–GC–ToF–MS)
AI summary Read the abstract
Researchers used pyrolysis gas chromatography-time of flight-mass spectrometry (Py-GC-ToF-MS) to characterise microplastics extracted from five locations in Rietvlei Dam, South Africa, identifying five polymer types (PE, PS, PA, PVC, and PET) as well as phthalate and fatty acid additives, with polyamide being the dominant polymer at 52%.
Assessing the Mass Concentration of Microplastics and Nanoplastics in Wastewater Treatment Plants by Pyrolysis Gas Chromatography–Mass Spectrometry
AI summary Read the abstract
Researchers used pyrolysis gas chromatography-mass spectrometry to measure the mass concentration of both microplastics and nanoplastics at different stages of wastewater treatment. They found that treatment plants removed over 93% of microplastics and nanoplastics by mass, but measurable amounts still remained in treated effluent. The study provides important data on nanoplastic levels in wastewater, which have been largely unmeasured due to limitations of previous detection methods.
Study of occurrence, abundance, and characterization of microplastics in wastewater treatment plant in New Delhi, India
AI summary Read the abstract
Researchers quantified microplastic prevalence in influent, treated effluent, and sludge from a wastewater treatment plant in New Delhi, finding that MPs are present throughout the treatment process and that the plant incompletely removes them, discharging MPs into receiving waters.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.