We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhanced removal of polyethylene terephthalate microplastics through polyaluminum chloride coagulation with three typical coagulant aids
AI summary Read the abstract
Researchers tested three coagulant aids — polyacrylamide (PAM), sodium alginate, and activated silicic acid — combined with polyaluminum chloride to remove PET microplastics from drinking water, finding that PAM at high dosage achieved up to 91.45% removal efficiency.
Given the discovery and hazard of microplastics in freshwater environments, the removal of microplastics in drinking water deserves more attention. Nevertheless, in the light of existing literature, the effectiveness of conventional coagulation on microplastics removal is insufficient. Hence, enhanced coagulation is worth being explored. This study investigated the improving performance of anionic polyacrylamide (PAM), sodium alginate (SA), and activated silicic acid (ASA) when using poly‑aluminum chloride (PAC) to remove polyethylene terephthalate (PET) microplastics. The experimental results showed that ASA had the highest removal efficiency (54.70%) under conventional dosage, while PAM achieved the best removal effect (91.45%) at high dosage. Mechanism of coagulation was studied by scanning electron microscope (SEM), Fourier transform infrared spectroscope (FTIR), X-ray photoelectron spectroscopy (XPS), and the results illustrated that when only PAC existed or the dosage of coagulant aids was low, double layer compression was the main principle. The increase of coagulant aids dosage improved the effect of adsorption and sweep flocculation significantly. Moreover, jar tests carried in different conditions demonstrated that the current coagulation systems were highly adaptable.
More Papers Like This
Enhancing microplastic removal from natural water using coagulant aids
AI summary Read the abstract
Researchers tested different chemical treatments for removing microplastic beads from natural water and found that polyaluminium chloride combined with polyacrylamide achieved over 95% removal across six common plastic types. The treatment worked on particles ranging from 10 to 1,000 micrometers, and natural organic matter in the water actually improved performance. The findings suggest that optimizing standard water treatment processes could be a practical way to reduce microplastic contamination in drinking water sources.
Coagulation of Wastewater Containing Polyethylene Terephthalate (PET) Microplastics by Using Ferric Chloride, Aluminum Sulfate and Aluminum Chlorohydrate: A Comparative Study
AI summary Read the abstract
Researchers compared ferric chloride, aluminum sulfate, and aluminum chlorohydrate coagulants for removing PET microplastics from plastic recycling facility wastewater, finding that aluminum sulfate at pH 6 achieved the highest removal rate of 90% for predominantly fragment-shaped MPs in the 251-500 micrometers size range.
Removal of Microplastics from Wastewater Treatment Plants by Coagulation
AI summary Read the abstract
Researchers tested coagulation-based methods for removing microplastics from wastewater using polyaluminum chloride and polyferric sulfate, with and without polyacrylamide additives. The best results came from combining polyaluminum chloride with cationic polyacrylamide, which achieved 87.5% removal of polystyrene microplastics. The study suggests that cationic polyacrylamide works especially well because of electrostatic interactions with negatively charged microplastic particles.
Improving nanoplastic removal by coagulation: Impact mechanism of particle size and water chemical conditions
AI summary Read the abstract
Researchers found that coagulation using aluminum chlorohydrate and polyacrylamide achieved up to 98.5% removal efficiency for polystyrene nanoplastics, with smaller particles being easier to remove, though humic acid in water competed for adsorption sites and reduced effectiveness.
Enhanced Removal of Polystyrene Microplastics from Water Through Coagulation Using Polyaluminum Ferric Chloride with Coagulant Aids
AI summary Read the abstract
Researchers tested enhanced coagulation using modified coagulants to remove polystyrene microplastics from water, finding that surface-modified coagulants achieved significantly higher removal efficiencies than conventional alum. Removal reached over 90% under optimized conditions, demonstrating a practical upgrade pathway for conventional water treatment plants to reduce microplastic discharge.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.