We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Removing free-floating oil from water using cationic polymers/surfactant-modified silica
AI summary Read the abstract
Researchers modified silica particles with four different cationic polymers and surfactants to improve their ability to adsorb and remove free-floating oil from water. High-molecular-weight polyethyleneimine-modified silica showed the best oil sorption performance, suggesting a viable approach for treating oily wastewater.
Abstract The purpose of this work was to evaluate the efficiency of oil sorption of silica particles modified by three different types of cationic polymers and a cationic surfactant. Low-molecular-weight polyethyleneimine (LPEI), high-molecular-weight polyethyleneimine (HPEI), polydiallyldimethylammonium chloride (PDM), and cetyltrimethylammonium bromide (CTAB) were used to modify the silica particles and then compared their performances for oil removal. The scanning electron microscope and zeta potential measurements were used to analyze the surface characteristics of unmodified and modified silica particles. Adsorptions of motor oil and palm oil on the modified silica particles have been investigated under various parameters such as the silica particle size, the oil concentration, the polymer/surfactant concentrations, and the pH. The results have shown that the modified silica particles enhanced the oil sorption ability by approximately 10–20 times depending on the size of silica particles, pH, and the type of polymer/surfactant used when compared with the unmodified silica particles. The highest palm oil adsorption values of LPEI-silica, HPEI-silica, PDM-silica, CTAB-silica, and unmodified silica were 2.40, 2.10, 1.95, 1.50, and 0.15 g/gsilica, respectively. Moreover, the oil sorption of the modified silica particles was increased by approximately 30–50% for the smallest-sized silica particles.
More Papers Like This
Efficient and Fast Removal of Oils from Water Surfaces via Highly Oleophilic Polyurethane Composites
AI summary Read the abstract
Researchers developed polyurethane foam composites coated with silica or activated carbon that can absorb up to 50% more oil from water than plain foam. Improved oil-spill cleanup materials also have relevance to removing other hydrophobic pollutants, including those that bind to microplastics in water.
The preliminary investigation on the microplastic removal using column flotation: effects of kerosene on the floatability of microplastics
AI summary Read the abstract
Researchers tested column flotation using kerosene as a collector to remove microplastics from water, finding that the hydrophobic surface properties of microplastics made them amenable to flotation-based separation. The study represents a preliminary investigation into flotation as a novel microplastic removal technique.
Oleo-extraction of microplastics using flotation plus sol-gel technique to confine small particles in silicon dioxide gel
AI summary Read the abstract
Researchers developed a new extraction technique that uses a hydrophobic silica precursor (TEOS) as a flotation medium, which then solidifies into a gel that physically traps microplastics, preventing the particle loss that plagues conventional flotation methods. The approach is especially valuable for recovering very small microplastics (under 100 µm) from environmental samples, a size fraction frequently undercounted in existing surveys.
Enhanced flotation removal of polystyrene nanoplastics by chitosan modification: Performance and mechanism
AI summary Read the abstract
Researchers improved removal of polystyrene nanoplastics from water using chitosan-modified air flotation, boosting removal efficiency from 3.1% to 96.7% by exploiting electrostatic attraction, enhanced hydrophobicity, and bridging adsorption to cause nanoplastics to aggregate into large, buoyant flocs.
Microplastics and other pollutants in the aquatic environment: study of interactions and new removal strategies
AI summary Read the abstract
Researchers evaluated iron magnetic nanoparticles (MNPs) with varying surface modifications -- bare Fe3O4, TEOS-coated, and TEOS+MPS-coated -- for removing four types of microplastics (Nylon 6, PTFE at two sizes, and PMMA) from water, assessing how surface chemistry and synthesis time affect removal efficiency.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.