We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
MicroplasticDegradation through Thermal Hydrolysisin Sewage Sludge and Its Impact on the Anaerobic Process
Summary
Researchers investigated the fate of microplastics in sewage sludge during thermal hydrolysis pretreatment and found that temperatures of 140-180°C significantly degraded microplastics while also affecting subsequent anaerobic biogas production from the treated sludge.
In the present study, the abundance of microplastics (MPs) in sewage sludge (SS) and their fate during thermal hydrolysis (TH) pretreatment were investigated. The initial MP concentration in 50 mL of SS sample (dry solids = 1 g) was 206 particles/g SS, of which around 54% were in solid phase while the rest were in the liquid phase. The TH runs were conducted in a high-pressure reactor at temperatures of 140–180 °C for 60 min. To study the degradation of MPs during the TH process, a few runs were performed with distilled water containing mixtures of different combinations of MPs at 160 °C. Subsequently, biogas generation from synthetic wastewater before and after the TH runs was also determined. The destruction of MPs increased with TH pretreatment. In this study, a detailed examination of the changes in shape, counts, particle size, surface composition, and morphology of MPs was performed. Various MP degradation mechanisms and indications of the aging of MPs were identified. Moreover, a significantly higher methane production was observed from the TH pretreated synthetic wastewater containing a mixture of MPs. TH pretreatment was found to be very effective for the destruction of MPs, which reduced their adverse impact on anaerobic treatment.
Sign in to start a discussion.
More Papers Like This
Microplastic Degradation through Thermal Hydrolysis in Sewage Sludge and Its Impact on the Anaerobic Process
Researchers found that thermal hydrolysis pretreatment of sewage sludge reduced microplastic concentrations from 206 particles/g to lower levels, with approximately 54% of microplastics initially in solid phase, and examined the implications for sludge management and microplastic fate.
Microplastics in sewage sludge destined to anaerobic digestion: The potential role of thermal pretreatment
Researchers found that thermal pretreatment of sewage sludge at 120°C did not degrade conventional PET microplastics but did alter biodegradable microplastics, which also boosted methane production during anaerobic digestion, raising concerns about how different microplastic types behave in sludge treatment.
Thermal hydrolysis alleviates polyethylene microplastic-induced stress in anaerobic digestion of waste activated sludge
Scientists found that pretreating waste sludge with heat before anaerobic digestion reduced the negative effects that polyethylene microplastics have on the process. The thermal treatment improved methane production and helped maintain healthy microbial communities even in the presence of microplastics. The study suggests that thermal hydrolysis could be a practical strategy for wastewater treatment plants dealing with microplastic-contaminated sludge.
Fate of microplastic during pyrolysis of sewage sludge
Researchers investigated what happens to microplastics embedded in sewage sludge when sludge is treated by pyrolysis, a high-temperature thermochemical process. Pyrolysis effectively destroyed most microplastic particles, but some residual polymer-derived compounds partitioned into the pyrolysis products.
Impact of alkaline thermal hydrolysis on anaerobic digestion of mixed sludge contaminated with microplastics
Researchers tested alkaline thermal hydrolysis pretreatment on sludge containing polyethylene and PVC microplastics before anaerobic digestion, finding that the pretreatment altered how microplastics affected subsequent methane production, with effects varying by polymer type and concentration.