We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Retention of anthropogenic microparticles in a wastewater treatment and reclamation plant combining membrane bioreactor and reverse electrodialysis treatments
AI summary Read the abstract
A study of an urban wastewater treatment plant combining membrane bioreactor and reverse electrodialysis technologies measured anthropogenic microparticle concentrations at each treatment stage, finding high retention of both synthetic and cellulosic textile fibers.
Anthropogenic microparticles, including natural and semisynthetic cellulosic textile fibres and microplastics, are generated globally as by-products of human activities and enter the environment mainly via wastewater. Wastewater treatment plants (WWTPs) play a crucial role in reducing these pollutants, thereby improving water quality and supporting planetary health. This study evaluates the concentration, variability, and characteristics of such particles across different stages of an urban WWTP in Tenerife (Canary Islands, Spain) equipped with a membrane bioreactor (MBR) and reverse electrodialysis (RED), and further examines their correlations with physicochemical water parameters and environmental factors. Monthly fieldwork in 2023 involved triplicate sampling at six WWTP points and reclaimed water supplied at a banana farm for crops irrigation. A total of 252 samples were generally submitted to an oxidative digestion, filtered, and the resulting anthropogenic particles (n = 12,847 items) were analysed using stereomicroscopy and Fourier transform infrared microspectroscopy (n = 1124 items). Particles ranged from 50 to 6607 μm and were categorised into fibres, fragments, films, and microbeads, with fibres accounting for over 60 % at all stages. Average concentrations were 926 ± 438, 2342 ± 658, and 43 ± 43 items/L in the influent, biological reactor, and final effluent, respectively. Composition analyses revealed 21 polymers in the influent but only 4 in the final effluent, with cellulosic fibres always being the predominant type. Time-dependent analyses showed higher particle loads in warmer months, yet an average retention of 95 % highlighted the efficacy of the system in reducing harmful microplastics pollution.
More Papers Like This
Assessing microplastic fate through textile wastewater treatment plants: Stage-specific retention and removal performance
AI summary Read the abstract
Textile factory wastewater is loaded with microplastics (mostly nylon fibers from fabric), and this study found that adding an extra filtering step, called tertiary treatment, removes over 95% of these particles before the water is released, compared to just 72% with standard treatment alone. Since these plants are a major gateway for microplastics into our rivers and oceans (and eventually our food and water supply), upgrading treatment plants with this additional step could meaningfully cut the amount of plastic pollution we're exposed to.
Pollution characteristics and fate of microfibers in the wastewater from textile dyeing wastewater treatment plant
AI summary Read the abstract
Researchers found that a textile industry wastewater treatment plant achieved 95.1% removal of microfibers, reducing concentrations from 334.1 items/litre in influent to 16.3 items/litre in final effluent, yet still released 4.89 x 10^8 microfibers into receiving waters daily due to the enormous treatment volume.
Detection and Analysis of Microfibers and Microplastics in Wastewater from a Textile Company
AI summary Read the abstract
Researchers analyzed microfiber and microplastic levels in wastewater from a textile company, finding that the on-site treatment plant removed only 38–65% of microfibers, meaning up to 62% — including acrylic, polyester, and polyamide particles — can escape into receiving waterways.
The Effect of Wastewater Treatment Methods on the Retainment of Plastic Microparticles
AI summary Read the abstract
This review examined how different wastewater treatment methods retain or remove plastic microparticles, finding that treatment plant design significantly affects how many microplastics escape to the environment. Advanced treatment processes such as membrane bioreactors outperformed conventional activated sludge systems in removing microplastics.
Microplastics in an urban wastewater treatment plant: The influence of physicochemical parameters and environmental factors
AI summary Read the abstract
Microplastics were quantified across four treatment stages of an urban wastewater treatment plant, finding an overall 90.3% removal efficiency with fragments and fibers dominating the final effluent, and identifying rainfall events and seasonal variation as significant factors affecting MP concentrations. The study highlights the importance of environmental variables when monitoring MP removal at WWTPs.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.