We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Processing and Characterization of Bioplastics from the Invasive Seaweed Rugulopteryx okamurae
Summary
Researchers used the invasive seaweed Rugulopteryx okamurae to develop bioplastic materials by blending it with glycerol and processing by injection molding, finding that higher seaweed content and elevated mold temperature improved the mechanical and functional properties of the resulting bioplastics.
The seaweed Rugulopteryx okamurae, from the Pacific Ocean, is considered an invasive species in the Mediterranean Sea. In this work, the use of this seaweed is proposed for the development of bio-based plastic materials (bioplastics) as a possible solution to the pollution produced by the plastic industry. The raw seaweed Rugulopteryx okamurae was firstly blended with glycerol (ratios: 50/50, 60/40 and 70/30), and subsequently, they were processed by injection molding at a mold temperature of 90, 120 and 150 °C. The rheological properties (frequency sweep tests and temperature ramp tests) were obtained for blends before and after processing by injection molding. The functional properties of the bioplastics were determined by the water uptake capacity (WUC) values and further scanning electron microscopy (SEM). The results obtained indicated that E' was always greater than E", which implies a predominantly elastic behavior. The 70/30 ratio presents higher values for both the viscoelastic moduli and tensile properties than the rest of the systems (186.53 ± 22.80 MPa and 2.61 ± 0.51 MPa, respectively). The WUC decreased with the increase in seaweed in the mixture, ranging from 262% for the 50/50 ratio to 181% for the 70/30 ratio. When carrying out the study on molded bioplastic 70/30 at different temperatures, the seaweed content did not exert a remarkable influence on the final properties of the bioplastics obtained. Thus, this invasive species could be used as raw material for the manufacture of environmentally friendly materials processed by injection molding, with several applications such as food packaging, control-release, etc.
Sign in to start a discussion.
More Papers Like This
The environmental impact and economic feasibility assessment of composite calcium alginate bioplastics derived from Sargassum
Researchers assessed the environmental impact and economic feasibility of producing calcium alginate bioplastics from Sargassum seaweed, presenting a novel approach that could address both plastic pollution and invasive seaweed problems in the Caribbean.
Novel seaweed-based bioplastic: A prospective Life Cycle Assessment
This PhD thesis uses life cycle assessment (LCA) to evaluate the environmental impacts of making bioplastic from brown seaweed. Seaweed-based bioplastics could offer a lower-impact alternative to conventional plastics, potentially reducing the generation of persistent microplastics in the environment.
Eco-Friendly Bioplastic Material Development Via Sustainable Seaweed Biocomposite
Researchers developed a seaweed-based bioplastic film using Gracilaria edulis algae combined with starch, glycerol, and chitosan. The resulting material showed mechanical properties comparable to starch-based commercial plastics, good biodegradability, and compostability, and showed potential for use in low-moisture food packaging. This work contributes to the effort to replace petroleum-based plastics with renewable alternatives that break down in the environment rather than persisting as microplastic pollution.
Sifat Fisik dan Mekanik Bioplastik Komposit dari Alginat dan Karagenan
Researchers developed a bioplastic composite from alginate and carrageenan — both derived from seaweed — and tested how varying carrageenan content affected its physical and mechanical properties. Higher carrageenan content improved strength and flexibility. Seaweed-based bioplastics could replace conventional plastics in packaging applications while reducing plastic pollution.
Synthesis and Characterization of Bioplastic from Macroalgae Padina australis
Researchers produced bioplastic from the brown macroalgae Padina australis as an alternative to petroleum-based synthetic plastics, which are major environmental pollutants. The alginate-based bioplastic showed promising material properties, suggesting marine algae could be a sustainable raw material for reducing plastic waste.