We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Nanoplastics removal during drinking water treatment: Laboratory- and pilot-scale experiments and modeling
Summary
Researchers used palladium-labeled nanoplastics to track removal through conventional drinking water treatment including ozonation and filtration, finding that biofilm-coated aged sand provided the best nanoplastic retention. Modeling predicted that a combination of three consecutive filtration steps could achieve removal exceeding 3-log units, with slow sand filtration contributing the most to overall nanoplastic removal.
Microplastics detected in potable water sources and tap water have led to concerns about the efficacy of current drinking water treatment processes to remove these contaminants. It is hypothesized that drinking water resources contain nanoplastics (NPs), but the detection of NPs is challenging. We, therefore, used palladium (Pd)-labeled NPs to investigate the behavior and removal of NPs during conventional drinking water treatment processes including ozonation, sand and activated carbon filtration. Ozone doses typically applied in drinking water treatment plants (DWTPs) hardly affect the NPs transport in the subsequent filtration systems. Amongst the different filtration media, NPs particles were most efficiently retained when aged (i.e. biofilm coated) sand was used with good agreements between laboratory and pilot scale systems. The removal of NPs through multiple filtration steps in a municipal full-scale DWTP was simulated using the MNMs software code. Removal efficiencies exceeding 3-log units were modeled for a combination of three consecutive filtration steps (rapid sand filtration, activated carbon filtration and slow sand filtration with 0.4-, 0.2- and 3.0-log-removal, respectively). According to the results from the model, the removal of NPs during slow sand filtration dominated the overall NPs removal which is also supported by the laboratory-scale and pilot-scale data. The results from this study can be used to estimate the NPs removal efficiency of typical DWTPs with similar water treatment chains.
Sign in to start a discussion.
More Papers Like This
A comparative study on the stability and coagulation removal of aged vs. nonaged nanoplastics in surface water
Researchers used palladium-doped nanoplastics as tracers to compare how environmentally aged and pristine nanoplastics behave during water treatment coagulation. They found that ozone-aged nanoplastics developed more oxygen-containing surface groups, making them harder to remove through conventional coagulation, while solar-aged particles showed mainly physical changes. The study suggests that current drinking water treatment processes may be less effective at removing aged nanoplastics than fresh ones.
Removal of nanoparticles (both inorganic nanoparticles and nanoplastics) in drinking water treatment – coagulation/flocculation/sedimentation, and sand/granular activated carbon filtration
Researchers reviewed the removal of inorganic nanoparticles and nanoplastics during conventional drinking water treatment, finding that coagulation/flocculation/sedimentation and sand/granular activated carbon filtration can substantially reduce nanoparticle concentrations but with variable efficiency depending on particle type.
Removal efficiency of micro- and nanoplastics (180 nm–125 μm) during drinking water treatment
Researchers tested how effectively standard drinking water treatment processes remove micro- and nanoplastics ranging from 180 nanometers to 125 micrometers. They found that coagulation and sedimentation alone removed less than 2% of plastic particles, while granular filtration was far more effective, achieving 87% to nearly 100% removal depending on particle size. The study also found that biofilm formation on microplastics significantly improved their removal during coagulation treatment.
Conventional and biological treatment for the removal of microplastics from drinking water
Researchers examined microplastic removal by a full-scale drinking water treatment plant, finding that conventional coagulation-flocculation-filtration processes and biological filters with granular activated carbon effectively reduced microplastic concentrations in treated water.
Treatment processes for microplastics and nanoplastics in waters: State-of-the-art review
This review summarized established and emerging treatment processes for removing microplastics and nanoplastics from drinking water and wastewater, evaluating coagulation, membrane filtration, advanced oxidation, and biological treatment in terms of removal efficiency and operational feasibility.