We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Evaluation of Membrane Fouling by Microplastic Particles in Tertiary Wastewater Treatment Processes
AI summary Read the abstract
Researchers evaluated membrane fouling caused by microplastic particles during tertiary wastewater treatment, finding that microplastics contributed to fouling through pore blocking and cake layer formation, which reduced membrane performance and treatment efficiency.
Microplastic (MP) pollution in aquatic environments poses substantial ecological, human, and economic threats. A common route of entry for MPs into the aquatic environment is through the effluent from wastewater treatment plants (WWTPs). Although membrane technologies as a tertiary treatment step have shown promise in mitigating the efflux of MPs, little is known about how MPs suspended in wastewater effluent affect membrane performance. One reason is that it is challenging to source MPs for filtration experiments which are representative of those found in WWTPs. As such, this study employed a milling and sieving process to create irregularly shaped polyethylene MPs approximately 10 μm in size which were then suspended in effluent wastewater (taken directly from a secondary clarifier tank). Membrane fouling caused by wastewater/MP interactions was investigated via constant pressure filtration experiments using commercial ultrafiltration and microfiltration membranes. It was found that even low concentrations of MPs in the wastewater increased the extent of membrane fouling. Furthermore, a backwashing process was found to significantly mitigate the effect of MP fouling on the membrane surfaces. The results from this study provide important insights into the governing factors for membrane fouling by MPs in water chemistries representative of WWTP effluents.
More Papers Like This
Recent advances on micro/nanoplastic pollution and membrane fouling during water treatment: A review
AI summary Read the abstract
Researchers reviewed recent advances in understanding how micro- and nanoplastics contribute to membrane fouling during water treatment processes. The study found that while membrane separation effectively removes microplastics from wastewater effluent, fouling caused by plastic particles along with dissolved organics and extracellular polymers remains a key obstacle, and understanding the fouling mechanisms is critical for improving treatment efficiency.
Effect of polypropylene microplastics on the performance of membrane bioreactors in wastewater treatment
AI summary Read the abstract
Researchers studied how polypropylene microplastics affect membrane bioreactors, a type of wastewater treatment system. They found that while these systems can effectively filter out microplastics, higher concentrations and smaller particle sizes caused membrane clogging and reduced treatment efficiency over time, which is important for designing better wastewater treatment facilities.
Effects of microplastic accumulation on floc characteristics and fouling mechanism in sequencing batch membrane bioreactor
AI summary Read the abstract
This study found that microplastic accumulation in membrane bioreactors disrupts the formation of biological flocs, reducing sludge aggregation and altering membrane fouling patterns. The findings indicate that microplastic contamination of wastewater treatment systems can impair treatment performance and membrane lifespan.
The Potential Role of Membrane Technology in the Removal of Microplastics from Wastewater
AI summary Read the abstract
This review examines membrane filtration as a technology for removing microplastics from wastewater, finding it promising but limited by issues of fouling and chemical instability. Improving membrane technology could significantly reduce the amount of microplastics discharged into waterways from treatment plants.
Kinetic and mechanistic analysis of membrane fouling in microplastics removal from water by dead-end microfiltration
AI summary Read the abstract
Researchers analyzed membrane fouling during microplastic removal by microfiltration, finding that polyamide particles caused more fouling than polystyrene due to higher hydrophobicity and smaller size, with pore blocking followed by cake layer formation as the dominant fouling mechanisms.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.