Microplastics and Heavy Metals Removal from Fresh Water and Wastewater Systems Using a Membrane

Water pollution, resulting from the degradation of plastics into microplastics, exposes humans and other living organisms to contaminated drinking water. Microplastics are capable of adsorbing toxic heavy metals which are carcinogenic and may affect the reproductive functions of living organisms. Hence, this study focuses on the characterization and quantification of microplastics in water to raise the awareness and propose a method of dealing with this emerging pollutant in various aqueous environments. The microplastics were separated from water using polyvinylidene difluoride (PVDF) and PVDF modified with carbon nano-onions (CNOs). The PVDF exhibited the highest concentration of microplastics in the wastewater influent (140 ± 1.85 MP/L) compared to the effluent (8.8 ± 2.10 MP/L), tap water (6.5 ± 5.77 MP/L), and lake water (10 ± 2.65 MP/L). The stereo microscope displayed red, blue, and black colored plastics. The morphological properties were determined using SEM. ATR-FTIR, equipped with Spectrum 10 Spectroscopy Software was used to establish the presence of high-density polyethylene (50%), poly(1,4-butylene terephthalate) (16.6%), nylon 12 (16.6%), and cellulose (16.6%) in the influent. The quantification of heavy metals extracted from the microplastics indicated that the concentrations of As (1.759 to 8.699 mg/L), Cu (83.176 mg/L) and Zn (0.610 mg/L) were above the acceptable limits. Our work is beneficial for the development of a microplastics monitoring protocol for various municipalities. Water treatment plants may also include the treatment of microplastics in the influent and monitor the effluent before the water is released back into the environment.