We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Biosorption Potential of Microbial and Residual Biomass of Saccharomyces pastorianus Immobilized in Calcium Alginate Matrix for Pharmaceuticals Removal from Aqueous Solutions
Summary
Researchers synthesized and characterized two biosorbents based on Saccharomyces pastorianus yeast immobilized in calcium alginate matrices and evaluated their performance in removing the pharmaceutical ethacridine lactate from aqueous solutions, achieving removal efficiencies above 90% at pH 4.0 and fitting adsorption data to multiple isotherm models including Freundlich, Sips, and Toth.
Two types of biosorbents, based on Saccharomyces pastorianus immobilized in calcium alginate, were studied for the removal of pharmaceuticals from aqueous solutions. Synthetized biocomposite materials were characterized chemically and morphologically, both before and after simulated biosorption. Ethacridine lactate (EL) was chosen as a target molecule. The process performance was interpreted as a function of initial solution pH, biosorbent dose, and initial pharmaceutical concentration. The results exhibited that the removal efficiencies were superior to 90% for both biosorbents, at the initial pH value of 4.0 and biosorbent dose of 2 g/L for all EL initial concentrations tested. Freundlich, Temkin, Hill, Redlich-Peterson, Sips, and Toth isotherms were used to describe the experimental results. The kinetic data were analyzed using kinetic models, such as pseudo-first order, pseudo-second order, Elovich, and Avrami, to determine the kinetic parameters and describe the transport mechanisms of EL from aqueous solution onto biosorbents. Among the tested equations, the best fit is ensured by the pseudo-second-order kinetics model for both biosorbents, with the correlation coefficient having values higher than 0.996. The many potential advantages and good biosorptive capacity of Saccharomyces pastorianus biomass immobilized in calcium alginate recommend these types of biocomposite materials for the removal of pharmaceuticals from aqueous solutions.
Sign in to start a discussion.
More Papers Like This
Preparation and Application of Si@Al Adsorbents for Different Pollutants Removal from Aqueous Solution
Researchers prepared a low-cost Si@Al adsorbent from electroflocculation waste by mixing sodium silicate at a 4:1 ratio and calcining at 200 degrees Celsius, demonstrating its efficient removal of organic pollutants, antibiotics, and metal ions from aqueous solutions.
Alginate/geopolymer hybrid beads as an innovative adsorbent applied to the removal of 5-fluorouracil from contaminated environmental water
Researchers developed alginate-geopolymer hybrid beads for removing the cytostatic drug 5-fluorouracil from water, characterizing the adsorbent material and demonstrating effective drug capture, addressing the environmental risk of pharmaceutical contamination from cancer treatment wastewater.
Equilibrium and Kinetic Modeling of Crystal Violet Dye Adsorption by a Marine Diatom, Skeletonema costatum
Researchers evaluated the marine diatom Skeletonema costatum as a biosorbent for removing crystal violet dye from water, achieving 98% adsorption efficiency under optimized conditions of pH 3 and 0.4 g of biomass. Adsorption followed Langmuir isotherm and pseudo-second-order kinetics, supporting its potential as a low-cost, natural water treatment material.
Tetracycline Removal from Water by Adsorption on Geomaterial, Activated Carbon and Clay Adsorbents
New geomaterial adsorbents made from clay, activated carbon, cement, and PVA polymer were synthesized and tested for tetracycline removal from water, achieving rapid equilibrium within 30 minutes and high adsorption capacity that was pH-dependent, offering a low-cost option for antibiotic contamination removal in wastewater treatment applications.
Fonksiyonelleştirilmiş selüloz esaslı yenilikçi bir adsorbentin farmasötik adsorpsiyon performansının incelenmesi
Researchers synthesized and evaluated two cellulose-based adsorbents -- CAc-PPUF and CMC-HMPUF -- for removing pharmaceutical micropollutants from water, finding that both materials demonstrated affinity for the target compounds. Batch adsorption experiments showed CAc-PPUF achieved higher removal efficiency for all three tested pharmaceutical compounds compared to CMC-HMPUF.