We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
DC-Dielectrophoretic Manipulation and Isolation of Microplastic Particle-Treated Microalgae Cells in Asymmetric-Orifice-Based Microfluidic Chip
AI summary Read the abstract
Researchers developed a microfluidic chip using direct-current dielectrophoresis to isolate microplastic-contaminated microalgae cells from uncontaminated ones, demonstrating that polystyrene adsorption coverage and thickness affected cell trajectory in ways detectable enough to enable separation of contaminated from clean cells.
A novel direct-current dielectrophoretic (DC-DEP) method is proposed for the manipulation and isolation of microplastic particle (MP)-treated microalgae cells according to their dielectric properties in a microfluidic chip. The lateral migration and trajectory of the microalgae cells were investigated. To induce stronger DC-DEP effects, a non-homogeneous electric-field gradient was generated by applying the DC electric voltages through triple pairs of asymmetric orifices with three small orifices and one large orifice located on the opposite microchannel wall across the whole channel, leading to the enhanced magnitude of the non-uniform electric-field gradient and effective dielectrophoretic area. The effects of the applied voltage, the polystyrene (PS) adsorption coverage, and thickness on the DC-DEP behaviors and migration were numerically investigated, and it was found that the effect of the PS adsorption thickness of the Chlorella cells on the DC-DEP behaviors can be neglected, but the effect on their trajectory shifts cannot. In this way, the separation of 3 µm and 6 µm Chlorella coated with 100% PS particles and the isolation of the Chlorella cells from those coated with various coverages and thicknesses of PS particles was successfully achieved, providing a promising method for the isolation of microalgae cells and the removal of undesired cells from a target suspension.
More Papers Like This
Dielectrophoretic separation of microalgae cells in ballast water in a microfluidic chip
AI summary Read the abstract
Researchers developed a microfluidic chip using dielectrophoresis to continuously separate microalgae cells from ballast water, which also contains bacteria, microplastics, and other particles. Improved ballast water treatment is important because ships spread invasive species and contaminants including microplastics to new ocean regions.
Microfluidic fractionation of microplastics, bacteria and microalgae with induced-charge electro-osmotic eddies
AI summary Read the abstract
Scientists developed a microfluidic device that uses electrically generated fluid eddies to separate microalgae from microplastic particles and bacteria without physical contact. The system achieved nearly 100 percent efficiency in sorting microalgae from microplastics and about 95 percent purity when removing bacteria. This technology could be valuable for both environmental monitoring of microplastic contamination and producing clean microalgae for pharmaceutical and biotechnology applications.
A microfluidic device for size-based microplastics and microalgae separation
AI summary Read the abstract
Researchers designed a microfluidic device that separates microplastics and microalgae by size using controlled flow patterns. The device could be used to isolate microplastics from complex environmental water samples containing biological material, improving the accuracy of microplastic monitoring.
Focusing, sorting, and separating microplastics by serial faradaic ion concentration polarization
AI summary Read the abstract
Researchers demonstrated a microfluidic technique that uses electric fields to continuously separate two types of microplastic particles in flowing water. This lab-on-chip approach could be developed into tools for monitoring or removing specific microplastic types from water treatment systems.
On the behavior of sub‐micrometer polystyrene particles subjected to AC insulator‐based dielectrophoresis
AI summary Read the abstract
Researchers investigated how sub-micrometer polystyrene particles behave under alternating current electric fields, a technique used for separating and manipulating tiny particles. The study found that the particles' behavior could be accurately predicted using established electrical theory, providing useful insights for developing microplastic detection and separation technologies.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.