We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Cellulose Fiber Rejects as Raw Material for Integrated Production of Pleurotus spp. Mushrooms and Activated Biochar for Removal of Emerging Pollutants from Aqueous Media
Summary
Researchers used cellulose fiber rejects from paper recycling as substrate for growing Pleurotus mushrooms, then converted the spent substrate into activated biochar that effectively removed emerging pollutants from water, demonstrating an integrated circular bioeconomy approach.
Cellulose fiber rejects from industrial-scale recycling of waste papers were dried and de-ashed using a combined cyclone-drying and sieving process. The upgraded fiber reject was used as a component of substrates for the cultivation of Pleurotus ostreatus and Pleurotus eryngii mushrooms. Acetic acid (AA) and acid whey (AW) were used to adjust the pH of fiber reject-based substrates. Spent substrate (SMS) was used for the production of activated biochar using H3PO4 and KOH as activating agents and pyrolysis temperatures of 500, 600, and 700 °C. The effectiveness of the biochars in removing pollutants from water was determined using acetaminophen and amoxicillin. By using a feeding rate of 250 kg/h and a drying air temperature of 70 °C, the moisture content of the raw fiber rejects (57.8 wt %) was reduced to 5.4 wt %, and the ash content (39.2 wt %) was reduced to 21.5 wt %. Substrates with 60 and 80 wt % de-ashed cellulose fiber were colonized faster than a birch wood-based control substrate. The adjustment of the pH of these two substrates to approximately 6.5 by using AA led to longer colonization times but biological efficiencies (BEs) that were higher or comparable to that of the control substrate. The contents of ash, crude fiber, crude fat, and crude protein of fruit bodies grown on fiber reject-based substrates were comparable to that of those grown on control substrates, and the contents of toxic heavy metals, that is, As, Pb, Cd, and Hg, were well below the up-limit values for food products set in EC regulations. Activated biochar produced from fiber reject-based SMS at a temperature of 700 °C resulted in a surface area (BET) of 396 m2/g (H3PO4-activated biochar) and 199 m2/g (KOH-activated biochar). For both activated biochars, the kinetics of adsorption of acetaminophen and amoxicillin were better described using the general order model. The isotherms of adsorption were better described by the Freundlich model (H3PO4-activated biochar) and the Langmuir model (KOH-activated biochar).
Sign in to start a discussion.
More Papers Like This
Remediation of emerging pollutants using biochar derived from aquatic biomass for sustainable waste and pollution management: a review
This review evaluates the use of biochar made from aquatic biomass, such as algae and aquatic plants, for removing emerging pollutants like pharmaceuticals and microplastics from contaminated environments. Researchers found that aquatic biomass-derived biochar can be an effective and low-cost adsorbent for a variety of pollutants. The study highlights the dual benefit of managing aquatic waste while creating useful materials for environmental cleanup.
Chitosan oligosaccharide-modified Pleurotus ostreatus mycelium for microplastic removal based on the green design concept
Researchers modified Pleurotus ostreatus mushroom mycelium with chitosan oligosaccharide and citric acid to create a green biosorbent for removing microplastics from water, finding the modified mycelium achieved high removal efficiency for polystyrene particles while remaining biodegradable and cost-effective.
Recent advances in biochar technology for aquatic pollution control: a critical review of applications, barriers, and future opportunities
Researchers reviewed two decades of research on biochar — a charcoal-like material made from organic waste — as a low-cost tool for removing pharmaceuticals, heavy metals, microplastics, and nutrients from water, achieving up to 80% pollutant removal. While promising, challenges in regeneration and scaling up production remain barriers to widespread use.
Bioremediation Using Microalgae and Circular Economy Approach: A Case Study
Researchers investigated the use of microalgae for bioremediation of water pollutants including nano- and microplastics, pharmaceuticals, and heavy metals, presenting a circular economy case study demonstrating how microalgal biomass can simultaneously treat contaminated water and generate value-added products.
Emerging contaminants in polluted waters: Harnessing Biochar's potential for effective treatment
This review explores how biochar, a carbon-rich material made from organic waste, can be used to remove a wide range of pollutants from contaminated water, including microplastics, heavy metals, antibiotics, and PFAS. Biochar works through multiple mechanisms like adsorption, electrostatic interactions, and chemical bonding, and can be enhanced through surface modifications. The study highlights biochar as a low-cost, adaptable tool for addressing emerging water contaminants.