We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics as carriers of iron and copper nanoparticles in aqueous solution
Summary
Researchers investigated how three common types of microplastics absorb iron and copper nanoparticles from water. They found that all three plastics could adsorb significant amounts of metal nanoparticles on their surfaces through physical attachment, with maximum absorption occurring under alkaline conditions. The findings highlight how microplastics can serve as carriers of metal pollutants in aquatic environments, potentially increasing their spread and ecological impact.
In recent years, microplastics have attracted a lot of attention due to their excessive spread in the environment, especially in aquatic ecosystems. By sorbing metal nanoparticles on their surface, microplastics can act as carriers of these pollutants in aquatic environments and thus cause adverse effects on the health of living organisms and humans. This study, investigated the adsorption of iron and copper nanoparticles on three different microplastics i.e. polypropylene (PP), polyvinyl chloride (PVC) and polystyrene (PS). In this regard, the effects of parameters such as; pH, duration of contact and initial concentration of nanoparticle solution were investigated. By using atomic absorption spectroscopic analysis, the amount of adsorption of metal nanoparticles by microplastics was measured. The maximum amount of adsorption occurred at pH = 11, after a duration time of 60 min and at the initial concentration of 50 mg L. Scanning electron microscope (SEM) images showed that microplastics have different surface characteristics. The spectra obtained from Fourier transform infrared analysis (FTIR) before and after the adsorption of iron and copper nanoparticles on microplastics were not different, which showed that the adsorption of iron and copper nanoparticles on microplastics was physically and no new functional group was formed. X-ray energy diffraction spectroscopy (EDS) showed the adsorption of iron and copper nanoparticles on microplastics. By examining Langmuir and Freundlich adsorption isotherms and adsorption kinetics, it was found that the adsorption of iron and copper nanoparticles on microplastics is more consistent with the Freundlich adsorption isotherm. Also, pseudo-second-order kinetics is more suitable than pseudo-first-order kinetics. The adsorption ability of microplastics was as follows: PVC > PP > PS, and in general copper nanoparticles were adsorbed more than iron nanoparticles on microplastics.
Sign in to start a discussion.
More Papers Like This
Characterization of polyethylene and polyurethane microplastics and their adsorption behavior on Cu2+ and Fe3+ in environmental matrices
Researchers characterized polyethylene and polyurethane microplastics and measured their ability to adsorb heavy metals, finding that both types can bind copper and iron ions from water — raising concern that microplastics may act as carriers that transport toxic metals deeper into aquatic ecosystems and food chains.
Adsorption and Desorption Behavior of Microplastics on Copper Ions in Aqueous Solution
This study investigated how microplastics of different types and surface chemistry adsorb and release copper ions in water. The findings show that microplastics can pick up and later release heavy metals depending on environmental conditions, acting as vectors that transport toxic metals through aquatic ecosystems.
Metal adsorption by microplastics in aquatic environments under controlled conditions: exposure time, pH and salinity
Scientists systematically varied pH, salinity, and exposure time during metal adsorption experiments on different microplastic types, finding that pH had the greatest influence on metal uptake, with higher pH favoring adsorption of copper, lead, and cadmium onto most tested polymers.
Evaluation of microplastic contamination by metals in a controlled environment: A risk to be considered
Researchers found that polyethylene terephthalate microplastics readily adsorb nickel, copper, and zinc metals in aquatic environments, demonstrating that degraded plastics can act as carriers for metal contaminants and pose compounded environmental risks.
Copper Adsorption to Microplastics and Natural Particles in Seawater: A Comparison of Kinetics, Isotherms, and Bioavailability
Researchers compared copper adsorption onto pristine and aged microplastics versus natural particles like algae and sediments in seawater, finding that natural particles generally had higher metal-sequestering capacity, challenging the emphasis on microplastics as dominant metal-transport vectors.