We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Sustainable Cotton Gin Waste/Polycaprolactone Bio-Plastic with Adjustable Biodegradation Rate: Scale-Up Production through Compression Moulding
Summary
This paper is not directly about microplastics; it explores the development of a biodegradable composite bioplastic made from cotton gin waste and polycaprolactone, aimed at reducing conventional plastic waste through compostable alternatives.
Cotton gin trash (CGT), a lignocellulosic waste generated during cotton fibre processing, has recently received significant attention for production of composite bio-plastics. However, earlier studies were limited to either with biodegradable polymers, through small-scale solution-casting method, or using industrially adaptable extrusion route, but with non-biodegradable polymers. In this study, a scale-up production of completely biodegradable CGT composite plastic film with adjustable biodegradation rate is proposed. First using a twin screw extruder, the prepared CGT powder was combined with polycaprolactone (PCL) to form pellets, and then using the compressing moulding, the pellets were transformed into bio-plastic composite films. Hydrophilic polyethylene glycol (PEG) was used as a plasticiser in the mixture and its impact on the biodegradation rate was analysed. The morphology of CGT bio-plastic composite films showed even distribution of CGT powder within the PCL matrix. The CGT incorporation improved the UV resistance, thermal stability, and Young's modulus of PCL material. Further, the flexibility and mixing properties of the composites were improved by PEG. Overall, this study demonstrated a sustainable production method of CGT bio-plastic films using the whole CGT and without any waste residue produced, where the degradation of the produced composite films can be adjusted to minimise the environmental impact.
Sign in to start a discussion.
More Papers Like This
Development of bio-composite mulch film from cotton gin wastes: Study of pesticide residue and outdoor stability and degradation
Researchers developed biodegradable mulch films made from cotton gin waste — an agricultural byproduct — combined with polycaprolactone, and showed they can remain stable during a growing season while degrading more readily than conventional plastic films. Replacing non-degradable plastic mulch, which fragments into soil microplastics, with truly biodegradable alternatives is an important step toward reducing agricultural plastic pollution.
Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent
Researchers developed biodegradable composite films by compounding cotton gin mote waste powder (up to 50% by weight) with polycaprolactone (PCL) and polyethylene glycol plasticizer, using a solvent-free melt extrusion process. The resulting films exhibited UV-shielding properties from lignin in the cotton waste, with 9.5 MPa yield strength and 442% elongation, offering a renewable alternative to non-biodegradable plastic films.
Conversion of low-quality cotton to bioplastics
Researchers converted low-quality cotton fibers unsuitable for textile use into bioplastics as an eco-friendly alternative to petrochemical plastics, demonstrating a method to reduce microplastic contamination by substituting conventional plastics with bio-based materials.
Utilization of Mango Seed Starch in the Manufacture of Polyester-Based Bioplastics
This materials science paper is not primarily about environmental microplastics; it investigates using mango seed starch as a filler in polyester-based bioplastic composites, aiming to produce biodegradable plastics from agricultural waste as a more sustainable alternative to conventional petroleum-based plastics.
Production of Biodegradable Polymeric Composites with the Addition of Waste
Researchers produced biodegradable polymer composites using glycerol, starch, and macauba epicarp fiber at varying loadings (10-30%), evaluating mechanical properties, water solubility, and biodegradability. Using agricultural waste fiber as reinforcement in biopolymer composites offers a more sustainable approach to reducing petroleum-based plastic use.