0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Remediation Sign in to save

Neutralization of Acidity (pH) and Reduction of Total Suspended Solids (TSS) by Solar-Powered Electrocoagulation System

Civil Engineering Journal 2023 51 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 50 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Elanda Fikri, Irfan A. Sulistiawan, Agus Riyanto, Aditiyana Eka Saputra

Summary

Researchers investigated a solar-powered electrocoagulation system for wastewater treatment, finding that increasing contact time significantly improved pH neutralization and total suspended solids reduction in hospital wastewater effluent.

Study Type Environmental

This study investigates the effect of electrocoagulation contact time on the pH and TSS of wastewater discharged from the wastewater treatment plant (WWTP) of the Psychiatric Hospital of West Java Province. The experiment followed the pretest-posttest control group design. This study involved testing 56 wastewater samples six times before and after treatment. Each treatment was repeated four times, and there was one control group for each repetition. The electrocoagulation tool used in this study consisted of six 1-mm electrode plates that were 8 cm apart, a current strength of 5A, a voltage of 12V, and a 50-Watt solar panel. The data were analyzed using descriptive and inferential statistics. The results showed that all electrocoagulation contact time treatments had a significant effect on increasing the pH and the TSS. Additionally, the electrocoagulation tool was found to be effective, stable, portable, and environmentally friendly, with a self-cleaning system that reduced operational costs and saved electricity through the use of solar panels. This study contributes to the development of an effective electrocoagulation toll for wastewater treatment and the determination of the optimal contact time for the tool, providing a practical solution to overcome the problems of pH and TSS in wastewater. These findings can be applied to other wastewater treatment plants, thus improving the quality of discharged wastewater. Doi: 10.28991/CEJ-2023-09-05-09 Full Text: PDF

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Electrical Innovations in Electrocoagulation: Designing and Testing Prototypes for Sustainable Water Treatment

Researchers designed and tested an innovative electrocoagulation prototype incorporating an optimised electrical generator to improve coagulation efficiency and reduce energy consumption in industrial wastewater treatment. Experimental testing demonstrated reliable performance of the system for treating industrial effluents without chemical additives, with applicability particularly relevant for arid regions.

Article Tier 2

Treatment of Fatty Acid Industry Wastewater using Electrocoagulation Method

Researchers investigated electrocoagulation using aluminum anodes and iron cathodes for treating fatty acid industrial wastewater, finding that 105-minute contact time and 3 cm electrode spacing reduced COD to 70 mg/L and TSS to 2 mg/L while raising pH to 7.3.

Article Tier 2

Removal of Microbeads from Wastewater Using Electrocoagulation

Researchers tested electrocoagulation as a method for removing microbeads from wastewater, finding it effectively reduced microbead concentrations and offering it as a promising complement to conventional wastewater treatment technologies.

Article Tier 2

Design of electrocoagulation system for removing non-sugar wastes from beet sugar press-water

Researchers designed and optimized an electrocoagulation cell for treating beet sugar press-water, systematically evaluating parameters including pH, current density, electrolysis time, and electrode material. Using an aluminum electrode array at pH 10.7 and 25.39 mA/cm2, they achieved up to 97.95% color removal and 79.80% total hardness removal from the wastewater.

Article Tier 2

Electrocoagulation Applied to Domestic Wastewater Treatment: Statistical Optimization and Validation in Different Real Matrices

Researchers optimized electrocoagulation parameters for domestic wastewater treatment using a statistical design-of-experiments approach, identifying a current density of 85 A/m² and pH 5.5 as optimal conditions that achieved up to 78.2% COD removal at an estimated operational cost of US$1.23 per cubic meter, supporting its use in decentralized and isolated community settings.

Share this paper